- Diesel Saws
- Gasoline Saws
- Hydraulic Saws
- Electric Saws
- Finish Cutting Saws
- Wall Saws
DIESEL POWERED - CONCRETE SAWS |
Husqvarna Rider Saw - RS 8500 D |
Husqvarna - Model RS 8500 D - Diesel
Large Rider Saw
 |
|
Model RS 8500 D - Rider Saw
Husqvarna RS 8500 D is a powerful, efficient rider saw, specifically designed for large projects with cutting depth up to 250 mm and with upcut configuration standard.
Features:
• The Quick Stick™ one-hand control is used for drive,
control and raising and lowering the blade.
• Blade clutch allows engine operation and saw
movements without blade rotation and assists in
freeing blades stuck in cut.
• The IntelliSeal blade spindle (patent pending) has four
sealed radial bearings for strength and durability.
Allows for a minimum of 500 hour maintenance
intervals and a 1000 hour limited warranty.
• Cummins 85 hp 4-cylinder turbocharged, liquid-cooled,
diesel engine
• Power-assisted zero-turn radius allows the RS 8500 D
to be easily aligned for fast and accurate cutting.
• Tilt steering for increased operator comfort
• Standard light kit for night operation
• New fold-up pointer
• Large fuel tank (75.7 l) for extended operation
• Hydraulic parking brake
Model RS 8500 D Rider Saw |
Engine |
Motor manufacturer |
Cummins |
Motor spec |
B3.3 turbo |
Max output |
63 kW / 85 hp |
Cylinder bore |
3.7 inch |
Fuel tank volume |
20 gal. |
Air filter type |
Multi stage |
Engine cooling |
Liquid /Air |
| |
Cutting Equipment |
Output RPM |
2600 rpm |
Blade diameter range, min-max |
14-26 " |
Diamond blade, max |
0 " |
Max cutting depth |
10 inch |
Spindle diameter |
1 " |
Blade shaft diameter |
2.01 inch |
| |
Transmission |
Axle front |
1.25 inch |
Rear axle type |
Single rear wheel drive system |
Transmission speed |
0-32.31 fpm |
| |
Dimensions |
Weight |
2050 lbs |
| |
|
|
Husqvarna Concrete Flat Saw - FS 6600 D |
Husqvarna - Model FS 6600 D - Diesel
Large Walk Behind
Flat Saw
3-Speed Gear Box
|
|
Features: Model FS 6600 D Concrete Flat Saw
• 66 HP John Deere 4-cyl. turbocharged diesel engine
• The Quick Stick™ one-hand control is used for drive,
control and raising and lowering the blade
• Blade clutch allows engine operation and saw
movements without blade rotation and assists in
freeing blades stuck in cut.
• Patented power transmission system with right-angle
gearbox and 16 V-belts for optimum power transfer
• Hydraulic parking brake
• Patent-pending electric tracking system reduces
operator fatigue and requires no tool
| Model FS 6600 D Specifications |
Engine |
Motor manufacturer |
John Deere |
Motor spec |
4024 TF 270 |
Max output |
49 kW / 66 hp |
Cylinder displacement |
146 cu.inch |
Cylinder bore |
3.39 inch |
Fuel tank volume |
9.75 gal. |
Air filter type |
Multi stage |
Engine cooling |
Liquid /Air |
| |
Cutting Equipment |
Blade diameter range, min-max |
18-42 " |
Diamond blade, max |
40 " |
Max cutting depth |
17.5 inch |
Spindle diameter |
1 " |
Blade shaft diameter |
2 inch |
| |
Transmission |
Axle front |
1 inch |
Rear axle type |
4-bolt hub mount |
Transmission speed |
0-30.48 fpm |
| |
Dimensions |
Weight |
1888 lbs |
Weight incl. packaging |
1985 lbs |
| |
Sound and noise |
Sound power level, LWA |
119 dB(A) |
Sound pressure |
94.8 dB(A) |
| |
Vibration |
Hand arm vibration (Aeq) |
< 3.6 m/s² |
| |
|
|
|
Husqvarna Concrete Flat Saw - FS 4800 D |
Husqvarna - Model FS 4800 D - Diesel
3-Speed Gear Box!
 |
|
Features: Model FS 4800 D Concrete Flat Saw
• The Quick Stick™ one-hand control is used for drive,
• control and raising and lowering the blade
• Our larger road saws are equipped with powerful
turbo diesel engines, and are designed to provide
more power at the blade spindle, which increases
efficiency in all kinds of sawing job.
• Engine also has low vibration levels, for more
comfortable operation
• All our saws have a compact and well-balanced
design with a low profile that makes them easy to
handle and transport.
• Blade clutch allows engine operation and saw
movements without blade rotation and assists in
freeing blades stuck in cut.
• The IntelliSeal blade spindle (patent pending) has
four sealed radial bearings for strength and
durability. Allows for a minimum of 500 hour
maintenance intervals and 1000 hr. limited warranty.
• Yanmar 48 hp 4-cylinder turbocharged diesel engine
• Liquid-cooled
• 12 belts from engine to blade
• Front pivot version has a patent-pending electric
tracking system, allows adjustments while cutting.
• The rear pivot version is equipped with electrically
controlled hydraulic differential system locking rear
wheels for positive traction to prevent slipping.
• Fully equipped control panel
• Very efficient transmission (12 belts from engine to
blade), these saws offer a big 42 hp at the
blade spindle, for high cutting speed and capacity.
| Model FS 4800 D Specifications |
Engine |
Motor manufacturer |
Yanmar |
Motor spec |
TNV88 |
Max output |
35 kW / 48 hp |
Cylinder bore |
3.5 inch |
Fuel tank volume |
7.79 gal. |
Air filter type |
Multi stage |
Engine cooling |
Liquid /Air |
| |
Cutting Equipment |
Output RPM |
3000 rpm |
Diamond blade, max |
30 " |
Max cutting depth |
11.8 inch |
Spindle diameter |
1 " |
Blade shaft diameter |
2 inch |
Bladeshaft drive |
3-Speed inline gear box |
| |
Transmission |
Axle front |
1 inch |
Rear axle type |
hydraulic |
Transmission speed |
0-9.14 fpm |
| |
Dimensions |
Weight |
1622 lbs |
| |
Sound and noise |
Sound power level, LWA |
113 dB(A) |
Sound pressure |
91 dB(A) |
| |
Vibration |
Hand arm vibration (Aeq) |
< 3.6 m/s² |
| |
|
|
|
Core Cut Concrete Flat Saw - CC6560 XLS |
CORE CUT - Model CC 6560 XLS - Diesel
Walk Behind
Flat Saw
|
|
Features: Model CC6560 XLS Concrete Flat Saw
• Fuel efficient 61 HP turbo diesel engine
•14" through 36" blade capacity
• Fits through a 36" door
• Strongest frame on the market
• Less rear end weight for easy maneuverability
• Reduced operator fatigue
• Zero side load PTO
• Easy to replace banded belts
• Improved depth indicator and depth stop
• Quieter horizontal muffler
| CC 6560 XLS Technical Specifications |
| Specs |
| Saw Height |
63" |
| Min Length Pointer Up, Handle In |
60" |
| Max Length Pointer Down, Handle Out |
124" |
| Handle Extension |
24" |
| Frame Width (rear) |
27-5/8" |
| Frame Width (front) |
31-1/4" |
| Frame Length |
49-1/2" |
| Saw Width |
37-1/8" |
| Front Axle Center Length |
21-3/4" |
| Rear Axle Center Length |
24-1/2" |
| Wheel Base Length |
23-7/8" |
| Blade Shaft Max Height |
19-1/2" |
| |
| Cutting Equipment |
| Maximum Depth of Cut |
14-3/4" |
| Blade Shaft Diameter |
1-3/4" |
| Arbor Diameter: |
1" with single drive pin |
| Blade Shaft Bearings |
Self-aligning double concave roller |
| Blade Shaft Drive |
10 belt |
| Blade Mounting |
right or left |
| Blade Raise and Lower |
Electro-hydraulic pump |
| Blade Coolant |
Dual multi-spray tubes |
| Blade Guard Attachment |
Slip-on through 30", Bolt on 36 |
| |
| Dimensions |
Front Wheel Dimensions |
8" x 3" x 1" |
| Rear Wheel Dimensions |
10" x 3" x 1-1/4" |
Handle Bars |
Tilt |
| |
|
| Transmission |
| Sundstrand-Sauer or Eaton Model 10 |
| Drive Speed |
0-200 feet per minute |
| |
| Features |
| Air Filter |
4 stage |
| Fuel Capacity |
9 gallons |
| Electric Start |
Standard
|
High Temperature
Shut-Off |
Gauge and Warning Light |
| Low Oil Alert |
Warning Light |
| Hour Meter |
Standard |
Tachometer |
Standard |
| Amp Meter |
Warning Light |
| Cutting Depth Indicator |
Standard |
| Quick Disconnect Blade Flanges |
Standard |
| Frame Lift |
Standard |
| Quick Release Rear Wheels |
Standard
|
| |
|
|
|
| |
GASOLINE POWERED - CONCRETE SAWS |
Soff-Cut Concrete Flat Saw - 5000 |
Soff-Cut 5000 - Gasoline
HEAVY DUTY
 |
|
Features: Soff-Cut 5000 Concrete Saw
The Husqvarna Soff-Cut 5000 Paver self-propelled gas
saw is designed for highway and paving applications. Features include a 27 hp engine with overhead valves, heavy-duty air cleaner, electric start, full pressure lubrication, hydraulic valve lifters, and a mechanical fuel pump. Several blade widths can be used, allowing different joint widths and crack control simultaneously. The unique saw design allows for a 4" depth of cut.
• For Highways, Runways, Paving
• Heavy Duty Use
• Economical and durable
• Self-Propelled 2-cycle Gas Saw
• Switch activated electronic adjustable handles
• Master switch control panel
• Electronic remote key start and choke
• High strength single piece frame
• 27 HP @ 3500 RPM with low oil light
• 20 amp regulated charging system
• Switch activated engine throttle/blade depth control
• Switch activated retractable guide
• Dual Halogen headlight system
• Adjustable depth of cut 2" to 4"
• Patented dry cut diamond blade
• Patented anti-ravel skid plate
• Patented safety arbor
• Patented low noise, low dust blade block enclosure
• Patented sawing method
• Built-in lifting system
• Mechanical depth guage
• Rear lighting system
• Non-stick low-density polyurethane wheels
• Positraction drive
• Self propelled
• Switch activated
hydrostatic transmission
• Remote mounted air filter
• Blade footage counter
• Travel speed indicator
Recommended Usage
Medium to Heavy-Duty:
Highways, Runways,
Commercial, Industrial,
Overlays
| Soff-Cut 5000 Blade Sizes |
| Standard Blade: |
| 14.0" x .120" (356mm x 3.05mm) Cut Depth 4" |
| 12.0" x .120" (305mm x 3.05mm) Cut Depth 3" |
| 12.0" x .250" or .380" or .500" Cut Depth 3" |
| 13.5" x .250 or .380" (343mm x 6.35, 9.65mm) 4" Cut |
| |
| S-Blade: |
| 14.0" x .250" Cut Depth 3" (356mm x 6.35mm) |
| 12.0" x .250" (305mm x 6.35mm) |
| 12.0" x .380" (305mm x 9.65mm) |
| 12.0" x .500" (305mm x 12.70mm) |
| 14.0" x .380" (356mm x 9.65mm) |
| |
|
|
Soff-Cut Concrete Flat Saw - 4200
|
Soff-Cut 4200 - Gasoline
HEAVY DUTY MULTI-PURPOSE
 |
|
Features: Soff-Cut 4200 Concrete Saw
The Husqvarna 4200 self-propelled dry-cutting gasoline saw has a low-noise enclosed design and is ideal for heavy-duty commercial, industrial and paving applications. The 4200 is designed for peak performance. Features include a 23 hp twin-cylinder gasoline engine, three-stage cyclonic air cleaner, oil cooler, full-pressure oil lubrication, hydraulic valve lifters, mechanical fuel pump and oil alert light. Multiple blade widths can be used, allowing different joint widths and crack control simultaneously.
• Highways, Runways, Paving, Commercial, Industrial
• Heavy Duty Use
• Economical and durable
• Self-Propelled 2-cycle Gas Saw
• Switch activated electronic adjustable handles
• Master switch control panel
• Electronic remote key start and choke
• High strength lightweight aluminum frame
• 22 HP @ 3500 RPM with low oil light
• 20 amp regulated charging system
• Switch activated blade depth control
• Switch activated retractable guide
• Halogen headlight system
• Adjustable depth of cut 1-1/2" to 3"
• Patented dry cut diamond blade
• Patented anti-ravel skid plate
• Patented safety arbor
• Patented low noise, low dust blade block enclosure
• Patented sawing method
• Mechanical depth guage
• Rear lighting system
• Non-stick low-density polyurethane wheels
• Positraction drive
• Self propelled
• Switch activated
hydrostatic transmission
• Remote mounted air filter
• Blade footage counter
• Travel speed indicator
• Switch activated engine throttle
Recommended Usage
Medium to Heavy-Duty:
Highways, Runways,
Commercial, Industrial,
Overlays
| Soff-Cut 4200 Blade Sizes |
| Standard Blade: |
| 13.5" x .120" (343mm x 3.05mm) Cut Depth 3" |
| 12.0" x .120" (305mm x 3.05mm) Cut Depth 2-1/4" |
| 12.0" x .250" or .380" or .500" Cut Depth 2-1/4" |
| |
| S-Blade: |
| 13.5" x .250" Cut Depth 3" (305mm x 6.35mm) |
| 13.5" x .380" (343mm x 9.65mm) |
| 12.0" x .250" (305mm x 6.35mm) |
| 12.0" x .380" (305mm x 9.65mm) |
| 12.0" x .500" (305mm x 12.70mm) |
| |
|
|
Soff-Cut Concrete Flat Saw - X4000 |
Soff-Cut - 4000 - Gasoline
HEAVY DUTY
 |
|
Features: Soff-Cut 4000 Concrete Saw
The Husqvarna Soff-Cut 4000 self-propelled gasoline saw is designed for heavy-duty commercial, industrial and paving applications. Features include a 20 hp twin-cylinder engine with overhead valves, heavy-duty air cleaner, electric start, full pressure lubrication, hydraulic valve lifters and a mechanical fuel pump. Three blade widths can be used, allowing different joint widths and crack control simultaneously.
• For Highways, Runways, Paving, Commercial
• Economical and durable
• Self-Propelled 2-cycle Gas Saw
•18 HP @ 3500 RPM with low oil shut off
• Electronic key start
• Switch activated blade depth control
•15 amp regulated charging system
• Mechanical remote retractable guide
• Adjustable depth of cut 1-1/2" to 3"
• Patented dry cut diamond blade
• Patented anti-ravel skid plate
• Patented safety arbor
• Patented low noise, low dust blade block enclosure
• Patented sawing method
• Minimizes chipping and spalling
• Non-stick low-density polyurethane wheels
• Self propelled by hydrostatic transmission
• Built-in lifting system
• Roll cage style framework
• High strength single piece frame
• Hour meter / tachometer
Recommended Usage
Medium to Heavy-Duty:
Highways, Runways,
Commercial, Industrial,
Overlays
| Soff-Cut 4000 Blade Sizes |
| Standard Blade: |
| 13.5" x .120" (343mm x 3.05mm) Cut Depth 3" |
| 12.0" x .120" (305mm x 3.05mm) Cut Depth 2-1/4" |
| 12.0" x .250" or .380" or .500" Cut Depth 2-1/4" |
| |
| S-Blade: |
12.0" x .250" or .380" or .500"
(305mm x 6.35mm or 9.65mm or 12.7mm) |
| 13.5" x .250" or .380"
(343mm x 6.35mm or 9.65mm) |
| |
|
Soff-Cut 2500 Gas Powered Saw |
Soff-Cut 2500 - Gasoline
HEAVY DUTY MULTI-PURPOSE
|
|
Features: Soffcut 2500 Concrete Saw
The Husqvarna Soff-Cut 2500 self-propelled dry cutting gas saw has a low noise enclosed design and is ideal for medium to heavy-duty commercial, industrial and paving applications. The 2500 is designed for versatility, ease of use and high production capabilities. Three blade widths can be used, allowing for different joint widths and crack control simultaneously. Features include a 13 hp engine, halogen lighting system, electric remote key start, and a cyclone air cleaner to increase engine longevity.
• Self-propelled dry cutting Gasoline saw
• Low noise
• enclosed design
• Ideal for medium to heavy-duty
commercial, industrial
and paving applications
• Designed for versatility
• Easy of use
• H igh production capabilities
• Three blade widths can be used, allowing for different
joint widths
and crack control simultaneously
• 13.0 HP engine
• Halogen lighting system
• Electric remote key start and rocker switch
• Controls for operator comfort
Recommended Usage
Medium to Heavy-Duty:
Highways, Runways,
Commercial, Industrial,
Overlays
| Soff-Cut 2500 Blade Sizes |
| Standard Blade: |
| 9.0˝ x .100˝
(229mm x 2.54mm) |
| 10.0˝ x .100˝
(254mm x 2.54mm) |
| |
| S-Blade: |
| 10.0˝ x .250˝
(254mm x 6.35mm) |
| 10.0˝ x .380˝
(254mm x 9.65mm) |
| |
|
|
Soff-Cut 2000 Gas Powered Saw |
Soff-Cut 2000 - Gasoline
|
|
Features: Soffcut 2000 Concrete Saw
A self-propelled dry-cutting gas saw ideal for medium to heavy-duty commercial, industrial and paving applications. The Husqvarna 2000 is designed for versatility, ease of use and high production capabilities. Three blade widths can be used, allowing for different joint widths and crack control simultaneously. Features include a 9 hp engine with automatic compression release for easy starting, chain driven overhead cam system, superior cooling, excellent lubrication system, and a cyclone air cleaner to increase engine longevity.
• Self-Propelled Saw
• 9 HP Engine
• Light to Medium Duty
• Used to control random cracking in concrete through
early timing of the cut
• Cuts control joints in the early stages of the concrete
setting
• Minimizes chance of cracking
• Recommended for driveways and light commercial use
• Roll cage style framework
• Patented safety arbor
• Patented sawing method
• Easy pull start engine
Recommended Usage
Medium to Heavy-Duty:
Highways, Runways,
Paving, Commercial,
Overlays
| Soff-Cut 2000 Blade Sizes |
| Standard Blade: |
| 10.0˝ x .100˝ (254mm x 2.54mm) |
| 9.0˝ x .100˝ (229mm x 2.54mm) |
| |
| S-Blade: |
| 10.0˝ x .250˝ or .380˝
(254mm x 6.35mm or 9.65mm) |
| |
|
|
Soff-Cut X-450 Gas Powered Saw |
Soff-Cut X-450 - Gasoline
|
|
Features: Soffcut Model X-450
• Dry cutting gas saw has a low noise
• Enclosed design
• Ideal for residential and light commercial work
• Designed for ease of use and convenience
• Light weight, fold-down handle for easy transport
• Wide
stance to stabilize the blade
• Promote straight, accurate cuts.
Recommended Usage
Light to medium duty:
Driveways, Parking Lots,
Sitework, Residential,
Light
Commercial.
| Soff-Cut 2500 Blade Sizes |
| Standard Blade: |
| 8.0˝ x .100˝
(203mm x 2.54mm) |
| |
| S-Blade: |
| 8.0˝ x .225˝
(203mm x 5.72mm)) |
| |
|
|
Soff-Cut 150 Gas Powered Saw |
Soff-Cut 150 - Gasoline
|
|
Features: Soffcut 150
The Husqvarna Soff-Cut 150 saw is designed for
residential and light commercial applications. The lightest gas saw in the Soff-Cut range, the 150 is designed for ease of use and convenience. Features include a patented low noise blade enclosure which allows the unit to be used in residential areas with minimal disruption. In addition,
the low-dust blade block system allows the saw to cut dry,
and it controls the debris for easy cleanup.
• Designed to be economical and
durable
• Provides same quality performance as the traditional
Soff-Cut saws
• Designed with durability in mind
• Distinctive roll cage style
• Works in conjunction with Soff-Cut blades
• Patented skid plates to allow Ultra
Early Entry™
concrete cutting
• Minimizes chipping and spalling while getting the job
done the same day.
Recommended Usage
Light to Medium-Duty:
Decorative Cuts, Driveways,
Parking Lots, Sitework,
Residential, Light Commercial
| Soff-Cut 150 Blade Sizes |
| Standard Blade: |
| 6˝ x .100˝ (152mm x 2.54mm) |
| 6˝ x .225˝ (152mm x 5.72mm) |
| |
|
|
|
|
Core Cut Flat Saw - CC1200 |
Core Cut CC1200 - Gasoline
Walk behind Flat Saw
Screw feed raise and lower system
|
|
Core Cut - Model CC1200 Concrete Flat Saw
The CC1200 has an outstanding heavy duty structure
with easily adjustable handlebars to fit the operator’s preference. Holds up to an 18” blade with 6-5/8” cutting depth with a slip-on blade guard with left or right hand sawing. The most economical walk behind concrete saw!
Features include:
•Heavy duty design makes this economical saw a favorite for small to medium size jobs.
• This saw comes with a 18" blade guard capacity allowing for a maximum cutting depth of 4 5/8"
• Maximum depth of cut with 18” blade: 6-5/8"
• Sturdy handles with no slack, slip-on blade guard, depth indicator, and left or right hand sawing.
• This saw does not come with a blade.
Need a blade? Blades for this saw can be found under Diamond Saw Blades.
• Warranty: One-year limited.
Model CC1200 Specifications |
Engine |
| Honda 13 HP |
Gas |
| Blade shaft RPM: |
2,600 RPM |
| |
Cutting equipment |
| Blade Capacity |
18" |
Maximum depth of cut with 14” blade:
|
4-5/8” |
Maximum depth of cut with 18” blade:
|
6-5/8” |
| Arbor size: 1” with drive pin |
|
| |
Handle extension: 11”
|
| Frame width: 13-1/2” |
| Frame length: 24” |
| Saw Width: 22” |
| Saw Height: 38” |
| Front axle center length: 9-1/2” |
| Rear axle center length: 17” |
| Wheel base length: 13” |
| Blade shaft maximum height: 10-1/2” |
| |
Dimensions |
| Weight |
280 lbs |
| |
Special features |
| Left or right hand sawing |
|
| Screw feed raise and lower system |
| Slip-on blade guard |
| Sturdy handles - will not rattle |
| |
| One-year warranty: limited |
| |
|
|
|
Core Cut Concrete Flat Saw - CC1300 XL |
Core Cut - CC1300 XL - Gasoline
Portable Saw
|
|
Features: Model CC1300XL Concrete Flat Saw
• Extra sturdy handles adjustable to 4 positions for precise
control - doesn't rattle
• 6-5/8" maximum cutting depth
• Solid, sealed self aligning blade shaft ball bearings
• Left or right side sawing
• Available Honda 2-cycle Gas (9 & 13 HP), Robin-Subaru
(9 HP)
or Lincoln electric (5 & 10 HP)
• 14" or 18" blade guards (20" setup available with
extended frame)
| CC1300XL Specifications |
|
Maximum Depth of Cut with 14" Blade |
4-5/8" |
Maximum Depth of Cut with 18" Blade |
6-5/8" |
Maximum Depth of Cut with 20" Blade |
7-5/8" |
Blade Shaft RPM |
2,600 |
Blade Shaft Diameter |
1-1/4" |
Arbor Size |
1" with drive pin |
| CC1300XL Dimensions |
|
Saw Height |
40" |
Minimum Length Pointer Up, Handle Down |
31-1/4" |
Maximum Length Pointer Down, Handle Up |
60" |
Handle Extension |
13-1/2" |
Frame Width |
12-3/4" |
Frame Length |
23-5/8" |
Saw Width |
22-3/4" |
Front Axle Center Length |
7-1/2" |
Rear Axle Center Length |
16-3/4" |
Wheel Base Length |
12-5/8" |
Blade Shaft Max Height |
10-1/2" |
|
|
|
HYDRAULIC - POWER CUTTER SAWS |
Husqvarna Hydraulic Cut-Off Saw - K2500 |
Husqvarna K2500
Hydraulic
|
|
Features: Model K2500 Power Cutter Saw
•Hydraulic gear motor
•Blade brake
•Servo for motor speed control
•Reversible cutting arm
•Easy
working closer to walls and the ground
•The flow can be adjusted during operation
•Water nozzle is optimally positioned
•Replaceable arbor bushing
•Capacity for 400 mm blade
•High power output with hydraulic operation, 5.2 kW
•Servo for motor speed control
•Blade brake
•Reversible cutting arm.
•Perfect balance for horizontal cutting
•Wet cutting kit is standard
| K2500 Technical Specifications |
| Motor |
Hydraulic gear motor
|
| Horsepower- hp (kW) |
7 (5.2) |
| Max Pressure - psi (bar) |
2,500 (170) |
| Max Flow- gal/min (I/min) |
10.5 (40) |
| Recommended flow rate |
10 gal/min |
| Blade diameter - in. (mm) |
16 (400) |
| Cutting Depth - in. (mm) |
6 (145) |
| Weight w/o blade |
18.3 lbs. |
| |
|
|
|
Husqvarna Hydraulic Cut-Off Saw - K3600 |
Husqvarna K3600
Hydraulic
|
|
Features: Model K3600 Power Cutter Saw
•Hydraulic gear motor
•Peripheral drive
•Adjustable front handle
•Automatic start for water flow
•260 mm cutting depth with 350 mm blade
•Unique eccentric drive
•Stable support rollers for easy adjustblade change
•Sealed drive and roller system
•Adjustable front handle
•Integrated, convenient water adjustment
•Large lower spray guard and integrated support foot
•Low weight and ergonomic design
•Supplied with grease gun to grease the guide rollers
•Simple service and cleaning
| K3600 Technical Specifications |
| Motor |
Hydraulic gear motor
|
| Max Pressure - psi (bar) |
2,500 (170) |
| Recommended flow rate |
10 gal/min |
| Blade diameter - in. (mm) |
14 (350) |
| Cutting Depth - in. (mm) |
10 (260) |
| Weight w/o blade |
17.8 lbs. |
| |
|
|
|
ICS 880 Force 4 - Chainsaw
|
ICS 880 Force 4 Chain Saw
Hydraulic
|
|
F880F4
A Great Saw with a Bad Attitude
The new 880F4 cutting system offers the superior strength of FORCE4™ technology in a package that meets industry standards of design and ergonomics. Built for the hardcore cutter, this sleek powerhouse is packed with features designed to make it the hardest working saw ICS® has ever made.
| 880F4-FL PRODUCT SPECIFICATIONS - 8 GPM |
| WEIGHT |
27.3 lbs (12.4 kg) with 15-inch (38 cm)
bar and chain |
| BAR LENGTH |
Up to 25 inches (63 cm) |
| MOTOR SPEED |
5700 rpm |
| POWERHEAD DIMENSIONS |
23 inches (58.5 cm) length
10.5 inches (26.5 cm) height
9.5 inches (24 cm) width |
| TORQUE |
130 in-lbs |
| HORSEPOWER |
11.5 hp |
| HYDRAULIC SUPPLY |
8 gpm (30 lpm), 2500 psi (172.5 bar) |
| NOISE LEVEL |
88 dB @ 3 ft (1 m) |
| VIBRATION LEVEL |
4 meters/second2 (front handle) |
| WATER SUPPLY |
Minimum 20 psi (1.5 bar) |
| |
|
| • Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply. |
|
ICS 880 Force 4 FL - Hydraulic Chainsaw |
ICS 880 Force 4-FL
High Performance for the Pro Cutter
|
|
Features ICS 880 Force 4-FL
When you’re in a tight spot, choose the 880F4-FL. The unique flush-cut design of these saws allows them to cut within 3/16 inches (4.8 mm) from walls or floors, bringing the precision of Diamond Chain Technology™ to a new level. Available in both 8 and 12 gpm models.
| 880F4-FL PRODUCT SPECIFICATIONS - 8 GPM |
| WEIGHT |
27.3 lbs (12.4 kg) with 15-inch (38 cm)
bar and chain |
| BAR LENGTH |
Up to 25 inches (63 cm) |
| MOTOR SPEED |
5700 rpm |
| POWERHEAD DIMENSIONS |
23 inches (58.5 cm) length
10.5 inches (26.5 cm) height
9.5 inches (24 cm) width |
| TORQUE |
130 in-lbs |
| HORSEPOWER |
11.5 hp |
| HYDRAULIC SUPPLY |
8 gpm (30 lpm), 2500 psi (172.5 bar) |
| NOISE LEVEL |
88 dB @ 3 ft (1 m) |
| VIBRATION LEVEL |
4 meters/second2 (front handle) |
| WATER SUPPLY |
Minimum 20 psi (1.5 bar) |
| |
|
| • Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply. |
|
|
|
|
ICS 814 PRO - Hydraulic Chainsaw |
ICS 814 PRO
Full Features in a Compact Size
|
|
814PRO
Big Performance in a Small Package
It may be small, but with as much power as its big brother the 853PRO, the 814PRO is ready for the big jobs. Lighter than other hydraulic saws with the ability to cut perfectly square openings as small as 3 ½ inches (9 cm), the 814PRO is a natural for utility work and other applications where a mix of portability and power are required.
| ICS 814PRO PRK™ SPECIFICATIONS |
| WEIGHT |
15 lbs (6.8 kg) with 13-inch (32 cm)
bar and chain |
| BAR LENGTH |
13 inches (32 cm) |
| MOTOR SPEED |
8800 rpm |
| CHAIN SPEED |
4400 fpm (25 m/s), free running |
| POWERHEAD DIMENSIONS |
14.3 inches (36.3 cm) length
11.3 inches (28.7 cm) height
9.2 inches (23.4 cm) width |
| TORQUE |
84 in-lbs |
| HORSEPOWER |
11.5 hp |
| HYDRAULIC SUPPLY |
8 gpm (30 lpm), 2500 psi (172.5 bar) |
| NOISE LEVEL |
88 dB @ 3 ft (1 m) |
| VIBRATION LEVEL |
3.5 meters/second2 (front handle) |
| WATER SUPPLY |
Minimum 20 psi (1.5 bar) |
| |
|
|
|
|
ELECTRIC - CONCRETE SAWS |
Husqvarna Concrete Flat Saw - FS 3500 E |
Husqvarna FS 3500 E
Electric
Small to Medium Jobs
|
|
Features: Model FS 3500 E Concrete Flat Saw
• Softstart feature gives a controlled start and reduces
the current spike
• Two-position handle bar for operator comfort
• Compact one-piece unibody frame allows passage
through a 36" doorway
• Emergency stop switch shuts off power to the 12-volt
system and electric motor control circuit
• Fully enclosed transmission
• Slip-on blade guard has an auto latch to clamp the
guard securely to the saw for added safety
• Arbor guard / nose latch and a blade guard handle
are standard
• Accommodates slip-on blade guards up to 30"
• Sealed ball bearing, maintenance-free polyurethane
front wheels and covered rear wheels
• One-piece water manifold with multiple jets.•Lift bail
is
standard
• Box frame is the most rigid available and provides
long life and less stress on the bladeshaft and bearings
• Turbo-style cyclone pre-cleaner reduces filter
maintenance
• Dual arbors allow the blade to be mounted on either
end of the bladeshaft for right or left cutting
• For maximum engine protection, the air filter has a
progressive restriction indicator
• 30 HP SoftStart electric model requires less starting
amperage
Model FS 3500E Specifications |
Engine |
| Motor manufacturer |
Lincoln |
| Motor spec |
ODP Encapsulated |
| Max output |
22 kW / 30 hp |
| |
Cutting equipment |
| Blade diameter range, min-max |
26-36 " |
| Max cutting depth |
12 inch |
| Spindle diameter |
1 " |
| Blade shaft diameter |
1.8 inch |
| |
Transmission |
| Axle front |
1 inch |
| Rear axle diameter |
1 inch |
| Travel speed |
Infinite speeds: 0 - 220 FPM |
| |
Dimensions |
| Weight |
9.027 lbs |
| Weight incl. packaging |
1000 lbs |
| |
|
|
Husqvarna K3000 WET Saw |
Husqvarna K3000 WET Saw
Electric
Powerful, versatile electric cutter with Wet Cutting Kit.
Demonstration of Wet Cutting Kit Attachment
Husqvarna K3000 Wet Saw Front View
|
|
Husqvarna K3000 WET Saw
A powerful, versatile electric cutter with wet cutting kit. Makes it possible to do smaller cutting jobs indoors with a minimum of dust and slurry. By using the wet cutting kit with specially designed nozzles in combination with double insulated rotor and GFCI, (Ground-Fault Circuit Interrupter), combines the advantages of the electric power cutter and an efficient dust suppression. K3000 Wet is the first model with Husqvarna DEX (Dust Extinguisher) system.
K3000 WET FEATURES:
• Powerful, versatile electric cutter.
• Pulling rotation
• Generous distance between the handles improves control and reduces load.
• Elgard™, the advanced electronic overload protection system, varies the rpm rate, to warn the user of an approaching overload.
• Electronic SoftStart™ allows starting with normal,
slow-acting fuses.
• Quick-locking of the spindle and large blade guard opening facilitate blade changes.
• Generously dimensioned mitre gear provides high durability, minimal power loss and low noise levels.
•DEX, Dust Extinguisher System – K 3000 Wet has an integrated regulator that controls the water volume, ensuring a constant flow to the blade. The amount of water is sufficient to bind the dust without creating an excess of water.
•A residual current device makes operation safer.
• The K 3000 Wet enables convenient, dust-free
cutting indoors.
• K 3000 Wet has an integrated regulator that controls
the water volume, ensuring a constant flow to the blade. The amount of water is sufficient to bind the
dust without creating an excess of water.
• The advanced electronic overload protection – varies
the rotation speed to warn of approaching overload.
• Provides electronic starting with normal, slow acting fuses.
| K3000 Wet Saw Specifications |
| Husqvarna K3000 WET |
| Engine |
Electric120V |
| Power |
1800 W |
| Rated current, A |
12/15/20 A |
| Rated output |
2700/1800/2200 W |
| Voltage |
230 / 120 / 110 V |
| Cutting equipment Blade diameter |
12/14 " |
| Max cutting depth |
3.94/4.92 " |
| |
| Dimensions |
| Weight including cutting equipment |
19.62 lbs |
| |
| Vibration |
|
| Vibrations front handle |
3.7 m/s² |
| Vibrations rear handle |
4.2 m/s² |
| Sound and noise Sound level |
95 dB(A) |
| Sound power level, guaranteed (LWA) |
108 dB(A) |
|
| |
|
| |
|
|
|
|
Soff-Cut Concrete Flat Saw - X390
|
Soff-Cut X-390
Electric
LIGHT COMMERCIAL
|
|
Soff-Cut X-390 Concrete Saw
FEATURES:
• For Highways, Runways, Paving, Commercial
• Economical and durable
• Self-Propelled 2-cycle Gas Saw
•18 HP @ 3500 RPM with low oil shut off
• Electronic key start
• Switch activated blade depth control
•15 amp regulated charging system
• Mechanical remote retractable guide
• Adjustable depth of cut 1-1/2" to 3"
• Patented dry cut diamond blade
• Patented anti-ravel skid plate
• Patented safety arbor
• Patented low noise, low dust blade block enclosure
• Patented sawing method
• Minimizes chipping and spalling
• Non-stick low-density polyurethane wheels
• Self propelled by hydrostatic transmission
• Built-in lifting system
• Roll cage style framework
• High strength single piece frame
• Hour meter/tachometer
| Soff-Cut X-390 Blade Sizes |
| Standard Blade |
| 13.5" x .120" (343mm x 3.05mm) Cut Depth 3" |
| 12.0" x .120" (305mm x 3.05mm) Cut Depth 2-1/4" |
| 12.0" x .250" or .380" or .500" |
| |
| S-Blade |
12.0" x .250" or .380" or .500"
(305mm x 6.35mm or 9.65mm or 12.7mm) |
| |
|
|
| |
DECORATIVE FINISH CUTTING SAWS |
Soff-Cut 50 Electric Finish Cut Saw |
Soff-Cut 50 - Electric
Finish Cuts, Scoring and Decorative Application
|
|
Features: Soff-Cut 50
The Husqvarna Soff-Cut 50 handheld saw is designed for finish cuts, scoring and decorature applications. The low dust blade block system allows the saw to cut dry and it controls the debris for easy cleanup. The handheld saw works in conjunction with Soff-Cut blades and patented skid plates to allow for Ultra Early Entry™ cutting, which minimizes chipping and spalling while getting the job done the same day.
• Light Duty: Finish Cuts, Decorative Cuts, Residential
• Handheld Saw
• 120V, 12 AMPS @ 11,000 RPM - Electric Saw
• Pro-Edge Beveled Blades
• Cut Depth: 7/8" (22.2mm) - 1" (25.4mm)
• Low noise and low dust blade block enclosure
• Adjustable blade depth control 1/4" to 1"
• Retractable front guide system
• Rear guide
• Curvilinear scoring at 2 ft. min. radius at 1/2" depth
• Patented safety arbor
• Patented sawing method
• Adjustable motor position for operator comfort
• Cuts to 1" from wall
• Paddle switch allows multiple hand positions
| Soff-Cut 50 Blade Sizes |
| Standard Blade: |
| 5" x .095" (127mm x 2.41mm) |
| 5.16" x .225" (131mm x 5.72mm) |
| |
|
|
Soff-Cut Gas Powered Finish Saw 150 D |
Soff-Cut 150 D - Gasoline
Designed for Beveled Cut Application
|
|
Features: Soff-Cut 150 D Deco Prowler
The Husqvarna Soff-Cut 150 D saw was designed especially for the contractor who wants a no-hassle way to make decorative cuts. It was also designed to be economical and durable. The 150 D has a low noise, low vibration 4-1/2 horsepower Robin engine and is ideal for large and small jobs alike. This saw, along with the Husqvarna Soff-Cut 50 handheld saw, is the perfect solution to your decorative jobsite needs.
• Decorative Bevel Cuts
• Push Saw
• Light to Medium Duty
• 4.5 HP @ 3800 RPM - 2-cycle Gas engine Saw
• Cyclone air filter
• Pro-Edge Beveled Blades
• Low noise and low dust blade block enclosure
• Mechanical blade depth control
• Non-marking and non-stick polyurethane wheels
• Retractable front guide system
• High strength single piece frame
• Folding handle
• Center lifting handle
• Roll cage style framework
• Patented safety arbor
• Patented sawing method
• Easy pull start engine
| Soff-Cut 150 D Blade Sizes |
| Standard Blade: |
| 6" x .100" (152mm x 2.54mm) Cut Depth: 1-3/16" |
| 6" x .225" (152mm x 5.72mm) Cut Depth: 1-3/16" |
| |
|
|
|
CONCRETE CUTTING - WALL SAWS |
Husqvarna Concrete Wall Saw WS 360 |
Husqvarna WS 360 Wall Saw
ACE Cutting Equipment
Package
Hydraulic
Built on a Modular System
• Husqvarna WS 360 Wall Saw
• PP2525 Power Pack
• 30" Diamond Blade
• Comes with 60' hydraulic hose assembly
Package starting at $41,000.00
|
|
Husqvarna WS 360 Wall Saw
The WS 360 series is the most utilized and popular wall sawing system in North America. It's dependability and ruggedness make it the most productive wall saw on the market. The WS 360 has proven itself on the jobsite and is considered the industry standard in wall saws.
• Built on a modular system, the saws are easy to
carry thanks to the optimised weight of each module.
• The weight is also evenly distributed between rail
and saw head, so the carriage stays on the track.
• 360 degree rotating arm allows the operator to saw
at full depth the entire length of the track.
• Carriages can be mounted at any point on the track, shortening the set-up time.
• Advanced hydraulic control
• Track can be mounted on uneven or irregular surfaces.
• Uses through-the-shaft water distribution, whereas
the WS 360-35 delivers water through spray tubes located in the blade guard. Both of these systems
allow for efficient blade cooling.
• Uses through-the-shaft water distribution, whereas
the WS 360-35 delivers water through spray tubes
located in the blade guard. Both of these systems
allow for efficient blade cooling.
PP2525 Mobile Power Pack:
Husqvarna offers a wide range of heavy-duty power
packs designed to be operated with the 360 series
wall saws. These power packs are available in three
different power options: gasoline engine, diesel engine and electric motor. Husqvarna power packs' simple,
yet powerful design performs reliably job.
Horsepower - 52 hp
Weight - 2,410 lbs.
| WS 360 Wall Saw Technical Specifications |
| Engine |
| Power output |
6.4 hp |
| Cylinder displacement |
5.74 cu.inch |
| |
| Cutting Equipment |
| Blade diameter |
14" or 16" |
| Max cutting depth |
4"/5"/6" |
| |
| Dimensions |
Weight
(excl. cutting equipment) |
23.37/24.25/26.01 lbs |
| |
| Vibration |
| Vibrations front handle |
3.1/3.7/2.5 m/s² |
| Vibrations rear handle |
5.4/4.5/3.5 m/s² |
| Sound and noise Sound power level, guaranteed |
(LWA) 114 dB(A) |
| |
|
|
|
Husqvarna Concrete Wall Saw WS 325 |
Husqvarna WS 325 Wall Saw
ACE Cutting Equipment
Package
Hydraulic
Built on a Modular System
• Husqvarna WS 325 Wall Saw
• PP418 Power Pack
• 28" Diamond Blade (W11070-28" x 250)
Total comes to $22,750.00 for package
|
|
Husqvarna WS 325 Wall Saw
FEATURES:
• 360 degree rotating arm allows the operator to saw
at full depth the entire length of the track.
• The saw carriage is advanced manually with a
telescopic and flexible crank.
• A small hand crank controls the blade depth
adjustment.
• Central flushing through the blade flange provides
efficient cooling with limited water spillage.
• Low weight and combined lifting and locking handles
ensure that it can easily be secured to the track.
• Supplied with; saw unit, feed handle, 4 mounting
brackets, track coupling, oil and NV18 flex head
wrench, carry cases. Also included are blade guard
with carry case, track sections, telescopic feed handle
and carry case for track and feed handle.
•Automatic power-on-demand is adjustable for different tools and hose lengths and can be switched off for constant power when desired.
•Compact size, light weight, large pneumatic tires and convenient folding handle make the PP 418 easy to transport and store.
•Hydraulic oil is cooled by a large, 4-gallon oil reservoir and 9-inch fan to provide maximum machine life and power.
•Electronic engine controller maintains constant engine speed under load to ensure maximum power at all flow settings.
PP418 Power Pack:
A power pack that gives optimum power with precise flow control allowing you to get the most performance out of your hydraulic equipment. Perfect power source for the Husqvarna WS 325, DM 406 H drill motor, K 3600 and K 2500 power cutters. Automatic power-on-demand is adjustable for different tools and hose lengths and can be switched off for constant power when desired. The hydraulic oil is cooled by a large, 4-gallon oil reservoir and 9-inch fan to provide maximum machine life and power.
| Model WS 325 Specifications |
Engine |
Power requirement |
12.5 hp |
Hydraulic flow |
9.5 - 12 gal/min |
Hydraulic pressure |
220 bar |
| |
|
Carriage and Track |
Weight, carriage |
53.3 lbs |
Weight, track section |
short: 28 lbs; long: 51 lbs |
| |
|
Cutting Equipment |
Blade diameter range, min-max |
28-36 " |
Max cutting depth |
16 inch |
Max starter blade |
28 inch |
| |
|
|
|
|
|
Husqvarna Concrete Wall Saw WS 463 |
Husqvarna - Wall Saw WS 463 - Hydraulic
Built on a Modular System
|
|
Features: Model WS 463 Wall Saw
• The universal mounting enables stair cutting
• With the universal mounting, dovetail cutting is
possible
• Built on a modular system, the saws are easy to
carry thanks to the optimised weight of each module.
• The weight is also evenly distributed between rail
and saw head, so the carriage stays on the track
• 360 degree rotating arm allows the operator to saw
at full depth the entire length of the track
• 20 kW (26.8 hp) true spindle output at saw head
• Advanced hydraulic control
• Patented hydraulic gear, 3 speeds
• Supplied with 4 wall mounting brackets, track
trolley, tool kit, track holder and blade guard guide
| Model WS 463 Specifications |
Engine |
Power requirement |
26.8 hp |
Hydraulic flow |
17.2 gal/min |
Hydraulic pressure |
230 bar |
| |
Carriage and Track |
Weight, carriage |
48.9 lbs |
Weight, track section |
short: 26.7 lbs; long: 41.1 lbs |
| |
Cutting Equipment |
Output RPM, position 1 |
630 rpm |
Output RPM, position 2 |
1000 rpm |
Output RPM, position 3 |
1400 rpm |
Blade diameter range, min-max |
24-63 " |
Max cutting depth |
29 inch |
Max starter blade |
39 inch |
| |
|
|
|
Husqvarna Concrete Wall Saw WS 325 |
Husqvarna - Wall Saw WS 325 - Hydraulic
The All Around Wall Saw
|
|
Features: Model WS 325 Wall Saw
• 360 degree rotating arm allows the operator to saw
at full depth the entire length of the track
• The saw carriage is advanced manually with a
telescopic and flexible crank
• A small hand crank controls the blade depth
adjustment
• Central flushing through the blade flange provides
efficient cooling with limited water spillage
• Low weight and combined lifting and locking handles
ensure that it can easily be secured to the track
• Supplied with; saw unit, feed handle, 4 mounting
brackets, track coupling, oil and NV18 flex head
wrench, carry cases. Also included are blade guard
with carry case, track sections, telescopic feed handle
and carry case for track and feed handle
| Model WS 325 Specifications |
Engine |
Power requirement |
12.5 hp |
Hydraulic flow |
9.5 - 12 gal/min |
Hydraulic pressure |
220 bar |
| |
Carriage and Track |
Weight, carriage |
53.3 lbs |
Weight, track section |
short: 28 lbs; long: 51 lbs |
| |
Cutting Equipment |
Blade diameter range, min-max |
28-36 " |
Max cutting depth |
16 inch |
Max starter blade |
28 inch |
| |
|
|
|
Husqvarna Concrete Wall Saw WS 462 |
Husqvarna - Wall Saw WS 462 - Hydraulic
Built on a Modular System
|
|
Features: Model WS 462 Wall Saw
• The universal mounting enables stair cutting
• With the universal mounting, dovetail cutting is
possible
• Built on a modular system, the saws are easy to
carry thanks to the optimised weight of each module
• The weight is also evenly distributed between rail and
saw head, because the carriage stays on the track
• 360 degree rotating arm allows the operator to saw
at full depth the entire length of the track
• 13 kW (17.4 hp) true spindle output at saw head
• Advanced hydraulic control
• Patented hydraulic gear, 2 speeds
• Supplied with 4 wall mounting brackets, track
coupling, oil, blade guard, connectable track with saw
trolley, tool kit, track holder and blade guard guide.
| Model WS 462 Specifications |
Engine |
Power requirement |
17.4 hp |
Hydraulic flow |
14.5 gal/min |
Hydraulic pressure |
210 bar |
| |
Carriage and Track |
Weight, carriage |
47.8 lbs |
Weight, track section |
short: 26.7 lbs; long: 41.1 lbs |
| |
Cutting Equipment |
Output RPM, position 1 |
800 rpm |
Output RPM, position 2 |
1200 rpm |
Blade diameter range, min-max |
24-49 " |
Max cutting depth |
21 inch |
Max starter blade |
40 inch |
| |
|
|
|
| |
|
