Core Cut Brand Tools at ACE Cutting Novi Michigan

CORE DRILL RIGS & DRILLS
CORE CUT - CORE DRILLING EQUIPMENT
CORE CUT - Model M-1 - Electric Combination Rig	M-1 Complete Combination Rig 1" to 10" bit capacity (14" with a spacer block) Dual switch/outlet control panel & amp meter Slide handle allows drilling in tight areas Streamlined base and carriage 2-1/2" square column with black oxidized finish Quick changeover from vacuum to anchor base 6" wheels for better mobility Complete Combination Rig Includes: Anchor/vacuum base, mast, carriage, control panel, vacuum pump, ceiling jack, motor mount plate and your choice of drill motor: Core Bore, Milwaukee or Weka

CORE CUT - Model M-2 - Electric Combination Rig	M-2 Complete Combination Rig Dual switch/outlet control panel & amp meter 4-spoke handle Precision ground & chrome plated 2-7/8" square mast Quick changeover from vacuum to anchor base 10" bit capacity (up to 36" with spacers) 6" wheels for better mobility Complete Combination Rig Includes:Combo anchor/vacuum base, mast, carriage, control panel, vacuum pump, ceiling jack, motor mount plate and your choice of Core Bore, Milwaukee or Weka drill motors.

CORE CUT - Model M-4 - Electric Complete Core Rig	M-4 Complete Core Rig Weighs only 35 pounds 6" bit capacity (3" handheld) Converts to hand held drill motor in seconds Combination stand quickly angles to 45 degrees Mast can rotate 360 degrees on swivel base Reversible slide handle - use left or right side drilling High strength, hard anodized, 1-1/2" x 2" aluminum mast 4 adjustable slide bearings provide superior carriage rigidity Carriage lock M-4 Complete Rig Includes: Vacuum base, vacuum pump, mast, slide carriage, slide feed handle, motor mount, top carrying handle, carriage lock, you choice of Weka handheld or Milwaukee drill motors. Anchor Rig Includes: Anchor base, mast, slide carriage, slide feed handle, motor mount, top carrying handle, carriage lock, you choice of Weka handheld or Milwaukee drill motors.

CORE CUT - Model M-5 - Electric Combination Rig	M-5 Combination Rig 12 inch bit capacity (up to 36" with spacers or pillow block) Easy quick disconnect motor mount Angle drilling capability up to 45 degrees Easily adjustable slide bearings Longer columns available up to 60 inches Quick release vacuum button Extruded all aluminum lightweight column built with strength and hard anodized for wear Double column support for increased stability Positive carriage lock 4-spoke sliding handle can be used on either side Convenient carrying handle (ceiling jack available) M-5 Combination Rig Includes: Vacuum base, angle support bars, base wheels, single switch control panel, slide carriage, 4-spoke handle, carrying handle and choice ofWeka, Milwaukee, Core Bore, hydraulic or air motors.

	Weka DK-12 • 35 lb. 6" Bit Max • Fast, chip free drilling with low power • 14 amp - Electronic overload • 580/1400/2900 RPM • Side handle and Case included • 5/8-11 and 1.250-7

DRY CORE DRILL BITS

DRY CORE BITS

Heavy Duty Dry Hole Saw - Premium Dry Hole Saw - Dry Vacuum

Heavy Duty Dry Hole Saw

Our Dry Hole Saw bits are the best in the business. We were the first to introduce them and nobody sells more. Drill dry through block and brick in seconds. No water needed. All bits have 5/8"-11 threaded hubs. Dry bits have 9" drilling depth. Jacobs Chuck Adaptor available for hammer drills 5/8"-11 thread to straight shank.

SPECIFICATION

DH - Block and soft brick

Notes: Not all types of brick and block can be drilled. Please consult factory. Not suitable for concrete or hard materials.

Dry Hole Saw Accessories
Part Description	Catalog #
1/2" x 12" carbide drill starter bit with "A" taper shank for 5/8"-11 hub	00033
5/8"-11 female to 5/8"-11 male pilot adaptor	01902

Premium Dry Hole Saw

Premium black grade dry hole saw bits feature wider segments than the heavy duty grade with a heavier core thickness. They drill faster and last longer than any bit of its kind.

SPECIFICATION

DP - Brick and block

Notes: Not all types of brick and block can be drilled. Please consult factory. Not suitable for concrete or hard materials.

Dry Vacuum Bit

Designed for drilling dry in cured concrete, brick and block. Use on standard core drill motors or high speed grinders. This bit takes up where the Dry Hole Saw leaves off. All bits have 1.250"-12 threaded hubs. All bits have a 9" drilling depth.

SPECIFICATION

DVH - Cured concrete, brick & block

Notes: Do not use in applications with steel heavier than wire mesh. Air vacuum swivel assembly needed to adapt to drill motors.

Dry Vacuum Accessories
Part Description	Catalog #
Air vacuum swivel assembly 5/8"-11 to 1.250"-12 threads	01950
12" air vacuum extension	01951

WET CORE DRILL BITS

WET CORE BITS

Heavy Duty Wet Hole Saw - Super Premium Wet Hole Saw

Standard Gold

An excellent general purpose bit with good diamond concentration for fast drilling. Designed for the occasional driller with average to light duty wet drilling.

SPECIFICATIONS

SMF - General purpose, fast drilling

SHL - Asphalt/block, long life

Heavy Duty Orange

The Heavy Duty Orange is our most popular bit. It has a high diamond concentration for excellent footage and drilling speed. Designed for all types of wet drilling in applications with light to moderate steel.

SPECIFICATIONS

H33F - Hard aggregate

HOL - General purpose, fast drilling

H64L - Asphalt/block, long life

Premium Black

Our Premium Black bit is the industry standard. Its very high diamond concentration gives maximum footage and drilling speed. Designed for all types of wet drilling. Good in moderate to high steel applications.

SPECIFICATIONS

P33F - Hard aggregate

POL - General purpose, fast drilling

P64L - Asphalt/block, long life

Impregnated Yellow

The Impregnated Yellow was our first bit made with synthetic diamonds. It works well in applications with prestressed cable, loose rebar and loose wire mesh.

SPECIFICATIONS

B - General purpose

Supreme Silver

The Supreme Silver bit has our highest diamond concentration for the most demanding of situations. This bit is designed for drilling smaller holes in applications with very heavy steel or extremely hard aggregate.

SPECIFICATIONS

U33F - Extremely hard aggregate

U38Z - Hard aggregate

UOL - Cured concrete with high steel

Pro Blue

The Pro Blue bit has a higher diamond concentration than our Premium Black bit. When you combine this high concentration with its wide spaced segments, you get a tough bit that drills very fast in heavy steel and hard aggregate applications.

SPECIFICATIONS

TOD - Hard aggregate, heavy steel

TOL - Fast drilling, heavy steel

Super Premium Red

The Super Premium Red bit is built for fast drilling and long life in moderate to heavy steel applications. It has our wide spaced segment design with the tallest segments we make, (.400"). Expect high performance and long life drilling when you choose Super Premium Red

SPECIFICATIONS

SPOD - Hard aggregate, heavy steel

SPOL - Fast drilling, heavy steel

Heavy Duty Orange Turbo

Our Heavy Duty Orange Turbo bit has high diamond concentration for excellent speed in moderate to heavy steel applications. This bit is one of the fastest general purpose bits available.

SPECIFICATIONS

THOWF - General purpose, moderate steel

THOWL - General purpose, heavy steel

Premium Black Turbo

The Premium Black Turbo is our most popular turbo bit. It has a very high diamond concentration for excellent performance in heavy to very heavy steel applications. Combine this excellent diamond concentration with its fluted segment design and you have a bit that flies through just about anything.

SPECIFICATIONS

TPOWF - General purpose, heavy steel

TPOWL - General purpose, high steel

Super Premium Plus Turbo

The Super Premium Plus Turbo bit has an extra-high diamond depth of .400". These bits last longer and drill faster than most turbo bits. The specially designed segments last throughout the entire life of the bit. Various specifications are available for hard aggregate to abrasive asphalt.

SPECIFICATIONS

SP33L - Hard aggregate, fast cutting, long life

SPOL - General purpose, fast cutting, long life

SP64L - Asphalt, fast cutting, long life

Pre Cast

Our Pre Cast core bits are made with half length, closely spaced segments to fill in gaps that resist segment failure from pre-tensioned wire and cable. Available in both Heavy Duty Orange and Premium Black quality grades.

SPECIFICATIONS

HOL - General purpose, light steel/pre-tensioned wire

POL - General purpose, light steel/pre-tensioned wire, long life

Thinwall Handheld Bits

Designed for fast, chip free drilling with low power, high speed drill motors. The continuous diamond crown is great for precise, smooth holes in thin or brittle materials. Available in Premium Black and Supreme Silver quality grades. Bits have 5/8"-11 threaded hubs.

SPECIFICATIONS

POF - General purpose

UOF - General purpose, long life

CORE DRILLING ACCESSORIES

CONTROL PANELS & VACUUM PUMPS

Single Switch Control Panel/Amp Meter

• One switch for both outlets
• Dual outlet - one for motor, one for vacuum
• Amp meter has three red lines; 15, 18 and 20 amp
• 110 or 220 volt models

Dual Switch Control Panel/Amp Meter

• Two switches - one for drill motor, one for vacuum pump

• Dual outlet - one for drill motor, one for vacuum pump

• Amp meter has three red lines; 15, 18 and 20 amp

• 110 or 220 volt models

Optional On/Off Switch

• Basic on/off toggle switch for your Core Bore or Milwaukee drill motors

• Can be mounted directly on the top of the motor

Core Drill Vacuum Pump

• Gast brand vacuum pumps mount easily and run quietly

• Pumps available for Core Bore rigs: M-1, M-2, M-3, M-4, M-5 and the All
• Purpose Vacuum Base

• Adjustable vacuum gauge

• Replaceable vacuum muffler

• Includes vacuum hose and connection

CORE CUT CONCRETE SAWS

Core Cut - SC6514 Speedi Cut JR

Speedi Cut- Model SC6514 - Gasoline
High Speed Hand Saw

Soffcut X4000 concrete saw

Features
Specifications

Model SC6514 - Speedi Cut JR

Features:
• 12" and 14" blade capacity with 20mm or 1" arbor
• 4.8 'Hemi' engine
• Weighs 22 lbs.
• 3-stage filtration system
• Enlarged, protected trigger area allows the operator
to wear gloves
• Low emission and excellent fuel economy.
• Advanced exhaust design reduces noise emissions
• Water hose connection for wet cutting

No Image Available

Core Cut Concrete Flat Saw - CC6560 XLS

CORE CUT - Model CC 6560 XLS - Diesel
Walk Behind Flat Saw

Core Cut CC6560XLS diesel walk behind flat saw

Features
Specifications

Features: Model CC6560 XLS Concrete Flat Saw

• Fuel efficient 61 HP turbo diesel engine
•14" through 36" blade capacity
• Fits through a 36" door
• Strongest frame on the market
• Less rear end weight for easy maneuverability
• Reduced operator fatigue
• Zero side load PTO
• Easy to replace banded belts
• Improved depth indicator and depth stop
• Quieter horizontal muffler

CC6560XLS Specifications

CC6560XLS Dimensions
Saw Height	63"
Min Length Pointer Up, Handle In	60"
Max Length Pointer Down, Handle Out	124"
Handle Extension	24"
Frame Width (rear)	27-5/8"
Frame Width (front)	31-1/4"
Frame Length	49-1/2"
Saw Width	37-1/8"
Front Axle Center Length	21-3/4"
Rear Axle Center Length	24-1/2"
Wheel Base Length	23-7/8"
Blade Shaft Max Height	19-1/2"

Core Cut Concrete Flat Saw - CC3700

Core Cut - Model CC3700 - Gasoline
Walk Behind Saw

Core Cut CC3700 gasoline walk behind flat saw

Features
Specifications

Features: Model CC 3700 Concrete Flat Saw

• 14" through 36" blade capacity
• One hand sawing control
• Forward-positioned motor for more weight at the blade
and less at the operator
• Powerful 65 HP Wisconsin gas engine (also available
with 30 HP Deutz diesel engine)
• Choice of Sundstrand or Eaton transmissions
• Frame designed for higher torque of a large horsepower
engine, but more compact than the CC6500 saw

CC3700 Specifications

Maximum Depth of Cut	14-2/4"
Blade Shaft Diameter	1-3/4"
Arbor Diameter	1" with single drive pin
Blade Shaft Bearings	Self-aligning double concave roller
Blade Shaft Drive	6 or 8 belt
Blade Mounting	Left or right
Blade Raise and Lower	Electro-hydraulic pump
Blade Coolant	Dual multi-spray tubes
Blade Guard Attachment	Slip-on through 30", Bolt-on 36"
Front Wheel Dimensions	8" x 3" x 1"
Rear Wheel Dimensions	10" x 3" x 1-1/4"
Handle Bars	Tilt
Transmission	Sundstrand-Sauer or Eaton Model 10
Drive Speed	0-200 feet per minute
Air Filter	4-stage
Fuel Capacity	6 gallons
Electric Start	Standard
High Temperature Shut-off	Standard
Hour Meter	Standard
Tachometer	Optional
Amp Meter	Standard
Cutting Depth Indicator	Standard
Quick Disconnect Blade Flanges	Standard
Frame Lift	Standard
Quick Release Rear Wheels	Standard
Telescoping Front Pointer	Standard

CC3700 Dimensions

Saw Height	49"
Min Length Pointer Up, Handle In	59"
Max Length Pointer Down, Handle Out	116"
Handle Extension	24"
Frame Width	25-3/4"
Frame Length	46"
Saw Width	32-1/4"
Front Axle Center Length	19-7/8"
Rear Axle Center Length	22-5/8"
Wheel base Length	21-3/8"
Blade Shaft Max Height	19-1/2"

Core Cut Concrete Flat Saw - CC1300 XL

Core Cut - Model CC1300 XL - Gasoline
Portable Saw

Core Cut CC1300XL gasoline portable concrete saw

Features
Specifications

Features: Model CC1300XL Concrete Flat Saw
• Extra sturdy handles adjustable to 4 positions for precise
control - doesn't rattle
• 6-5/8" maximum cutting depth
• Solid, sealed self aligning blade shaft ball bearings
• Left or right side sawing
• Available with Honda gas (9 & 13 HP), Robin-Subaru (9 HP)
or Lincoln electric (5 & 10 HP)
• 14" or 18" blade guards (20" setup available with
extended frame)

CC1300XL Specifications

Maximum Depth of Cut with 14" Blade	4-5/8"
Maximum Depth of Cut with 18" Blade	6-5/8"
Maximum Depth of Cut with 20" Blade	7-5/8"
Blade Shaft RPM	2,600
Blade Shaft Diameter	1-1/4"
Arbor Size	1" with drive pin

CC1300XL Dimensions

Saw Height	40"
Minimum Length Pointer Up, Handle Down	31-1/4"
Maximum Length Pointer Down, Handle Up	60"
Handle Extension	13-1/2"
Frame Width	12-3/4"
Frame Length	23-5/8"
Saw Width	22-3/4"
Front Axle Center Length	7-1/2"
Rear Axle Center Length	16-3/4"
Wheel Base Length	12-5/8"
Blade Shaft Max Height	10-1/2"

CORE CUT - MASONRY SAWS - GASOLINE

CORE CUT Masonry Saw CC813H-24

CORE CUT - Model CC813H-24 - Gasoline
24" Blade Block Saw

Core Cut CC813H-24 Block Saw 24"

Features
Specifications

CC813H-24 Block Masonry Saw Features:

• 24" blade capacity (10" cut depth)
• 2-cycle Gasoline powered engine
• Foot pedal controlled operating head leaves operator hands
free to guide material
• Stay level blade guard and enclosed shaft
• Easy rolling 16" x 25" aluminum cutting cart
• Vulcanized rubber non-slip top
• Water pump standard on all models
• Replaceable conveyor rails
• Durable 3/16" steel frame
• Fork lifting openings for easy transport
• 2 V-belt drive

CC813H-24 Specifications
Maximum Depth of Cut	8" (20" model), 10" (24" model)
Arbor Diameter	1"
Water Pump	Standard on all models
Blade Shaft Drive	Matched set of 2 gripnotch V-belts
Blade Raise and Lower	Counterbalanced, spring tensioned head pivots on (2) 1" flange block bearings
Blade Coolant	Dual spray tubes, pump fed (electric only), pump from pan (gas only)
Air Filter	3 stage Cyclone (gas only)
Fuel Capacity	1 gallon
High Temp Shut-Off	Standard (electric only)
Starter	Recoil on gas models, capacitor on electric models

CC813H-24 Dimensions
Saw Length	54"
Saw Width	24"
Saw Height	72"
Arbor Height Over Cart	16"
Cart Travel	20-3/4"

CORE CUT- MASONRY SAWS - ELECTRIC

Core Cut CC525M-E1 Electric Powered Saw

Core Cut - Model CC525M-E1 - Electric
Masonry Paver Block Saw
(Shown with Optional Legs)

Core Cut CC525M-E1 Block Saw electric

Features
Specifications

Diamond Products - Core Cut CC525M-E1
Masonry Paver Block Saw

Features:
• Convenient side carrying handles
• Removable head
• Stay level blade guard
• Water pump standard on all models
• Open throat cutting
• Enclosed blade shaft and bearings
• Easy, safe access to depth control lock
• Reinforced tray wheel housing
• Leg kit comes standard, folding stand optional

CC525M-E1 Specifications
Maximum Depth of Cut	5"
Blade Shaft Diameter	7/8"
Arbor Diameter	1"
Blade Capacity	14"
Blade Shaft Bearings	Flange block ball bearings
Blade Shaft Drive	2 belt
Blade Mounting	Right
Blade Raise and Lower	Counterbalanced spring tensioned head pivots on (2) 7/8" flange block bearings
Blade Coolant	Dual spray tubes, garden hose connection
Air Filter	3-stage Cyclone
Fuel Capacity	1 gallon (gas only)
High Temp Shut-Off	Standard (electric only)
Starter	Recoil (gas only), capacitor (electric only)

CC525M-E1 Dimensions
Saw Length	34"
Saw Width	24-3/4"
Saw Height	32-7/8"
Stand Height	27"
Total Height	58-3/8"
Arbor Height Over Cart	15-3/8"
Cart Travel	20-3/4"

Core Cut CC875E1-24 Paver Block Saw

Core Cut - Model CC875E1-24 - Electric
Stand-Up Masonry Paver Block Saw

Core Cut CC875E1-24 Masonry Saw electric

Features
Specifications

Diamond Products - Core Cut CC875-E1-24
Masonry Paver Block Saw

Features:
• Durable 3/16-inch steel frame
• 20" or 24" blade capacity (8" or 10" cut depth)
• Foot pedal controlled operating head leaves
operator hands free to guide material
• Stay level blade guard and enclosed shaft
• Easy rolling 16" x 25" aluminum cutting cart with
Vulcanized rubber non-slip top
• Water pump standard on all models
• Replaceable conveyor rails
• Durable 3/16" steel frame
• Fork lifting openings for easy transport
• 2 V-belt drive

CC875E1-24 Specifications
Maximum Depth of Cut	8" (20" model), 10" (24" model)
Arbor Diameter	1"
Water Pump	Standard on all models
Blade Shaft Drive	Matched set of 2 gripnotch V-belts
Blade Raise and Lower	Counterbalanced, spring tensioned head pivots on (2) 1" flange block bearings
Blade Coolant	Dual spray tubes, pump fed (electric only), pump from pan (gas only)
Air Filter	3 stage Cyclone (gas only)
Fuel Capacity	1 gallon
High Temp Shut-Off	Standard (electric only)
Starter	Recoil on gas models, capacitor on electric models

CC875E1-24 Dimensions
Saw Length	54"
Saw Width	24"
Saw Height	72"
Arbor Height Over Cart	16"
Cart Travel	20-3/4"

CORE CUT Masonry Saw Model CC 300M

CORE CUT - Model CC300M - Electric
14" Masonry Saw

Click here for CC300M Video Demo

Core Cut CC300M electric 14"

Features
Specifications

CC300M Masonry Saw

Features:
• Powerful 3 HP motor
• 14" blade capacity
• Tool-free air filter replacement
• Saw head adjusts easily
• Longer motor life due to a superior air filter
• Includes 2 spare air filters
• Blade not included

CC300 Specifications
Power Supply	115V/60Hz
Power	2 Horsepower
Amp Draw	15 Amp
RPM	3600
Blade Capacity	14"
Max. Depth of Cut	5"
Max Length of Cut	16"
Material Size	8" x 8" x 16"
Weight	80 lbs.
Saw Height	24"
Saw Length	28"
Saw Width	23"

Core Cut - Mini Groover - CG-1 / CG-2

Core Cut- Model CG-1 / CG-2 - Gasoline

Soffcut X4000 concrete saw

Features
Specifications

Model CG-1 / CG-2 - Mini Groover

Compact and versatile is what the "Mini-Groover"
Walk Behind machine is all about.

Features:
•Affordable and compact grinding, grooving and
texturing machine
•Useful for creating textured anti-slip areas for
improved traction.
• CG1 - 10" wide grinding head capacity.
• CG2 - 16" wide grinding head capacity
• Hydrostatic transmission
• Maneuverable in hard to reach areas
• Power raise and lower system

CG-1 / CG-2 Mini Groover Models
Model #	Description	Part #	Cat #
CG-1G20	18HP Honda X620 10" Grinding Head	5803002	08003
CG-1G24	20.5HP Honda GX670 10" Grinding Head	5803003	08005
CG-1G27	27HP Kohler 10" Grinding Head	5803004	08006
CG-1GE15	15HP Electric 10" Grinding Head	5803005	08009
CG-2D49	49HP Deutz Diesel 16" Grinding Head	5803006	08771
CG-2E30	30HP Lincoln Electric 16" Grinding Head	5803007	08985

Husqvarna Concrete Flat Saw - FS 6600 D

DS-301 Hand Held Polisher

Soffcut X4000 concrete saw

Features
Specifications

Model DS-301 - Hand Held Polisher

Rugged, hand-operated 12 inch platform that grinds,
hones and polishes concrete surfaces.

Features:
•Uses 3 diamond polishing pads or cup wheels.
•Operates wet or dry (with use of optional cowl).
• 'Planetary' gear-driven tool
• 12 inch platform turns at a lower rate than the higher
   rotational speed (> 2000 rpm) of the 5 inch platens.
• This rpm speed provides the best speed for diamond
   polishing, producing a perfect finish 5 times faster than
   a single head polisher.
• Unit is powered by a heavy duty FEIN variable
   speed polisher.
• Center coolant feed
• Precision bearings
• Sturdy construction

DS-301 Polisher Specifications
Part Number	5800976
Catalog Number	47007
Power	110V/60Hz
Driver Speed	900 to 2700 RPM, maximum
Platen Speed	150 to 400 RPM, maximum
Platform Speed	750 to 2250 RPM
Weight	25 lbs.
Shipping weight	44 lbs.
Coolant feed	Included
Slurry Skirt	Included