Digital Smart Tool - 2' - 4' - 6' Levels

MD - 24 in. Smart Tool
Available in 24" and 48" lengths

Smart Level - Digital Carpenters Level

|

Features
Specifications

Smart Level - Digital Carpenters Level

smart tool level
The 24" and 48" SmartTool Digital levels contain the SmartTool Builder's Angle Sensor inclinometer module permanently mounted into a durable aluminum frame. The level includes an indestructible horizontal spirit bubble vial and a plumb spirit bubble vial. Durable plastic endcaps protect the level when dropped.

These SmartTool levels are perfect for professional carpenters, framers, plumbers, concrete workers, and hobbyists who demand accuracy and precision beyond any other digital level in the world. It is the standard for inspectors and builders of ramps and floors that must be in accordance with the American Disabilities Act's (ADA) strict requirements.

The Smart Tool is based around an electronic module which can display angle over a full 360° range with a resolution of 0.1°. It is available as either a stand alone module or as a 60cm or 120cm long levelling tool. The module can be used as supplied, or it can be panel mounted into your product or equipment. The SmartTool levels can be used in a variety of applications as both a conventional level and as an angle setting or measuring tool.

LEVEL CONTROL FEATURES:

• ON/OF - Automatic shut-off if left idle for 6 minutes
• LISTEN & LEVEL AUDIO - Beeper will sound at level
   and plumb
• Deg.,%,IN/FT - Select display units
• LOW BATTERY - Low 9V battery indicator
• HOLD - Freeze or unfreeze display readings
• CALIBRATE - Simple two-step calibration procedure   (recommended once per day)
• UP/DOWN ARROW - Show direction of tilt to reach
   level or plumb

Product Includes:

24in. Digital Level - Smarttool
Operation Manual
9-V Battery

Smart Tool - Digital Carpenters Level

Smart Tool is simple to use
SmartTool permits you to find level and plumb in two ways. For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module. It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't. So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be. And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).

Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool. Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.

Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes.

Listen and Level Audio Feature
Have tasks where you really can't see the SmartTool but need instant feedback? Then turn on the audio beeper. When turned on with a single button, SmartTool lets you hear when your task is at level or plumb. This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.

Hold
The hold button makes it easy to measure in areas where the digital display is not visible. Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.

From the Manufacturer
SmartTool electronic level all ready to go in a 2 ft. long aluminum frame. Only SmartTool electronic level can measure all angles in a 360 degree range. Installing a deck, stair rail, extending a roof, or determining how much an old floor has sagged is simpler and less time consuming. The display even flips over with the level, and it shuts off automatically after 5 minutes when it is not being used, all this from a standard, 9-volt battery (not included). Features: angle accuracy to 1/10 of a degree, the mode button lets you see angles in three ways-degrees, percent slope or pitch (inches of rise per foot of run), and Listen & Level ideal for poorly lit areas. Also allows hands-free operation as the audible tone alerts you when tool reaches level or plumb.

Image not Available

MD - 24 in. Smart Tool Available in 24" and 48" lengths

Smart Level - Digital Carpenters Level

|

MD - 24 in. Smart Tool
Available in 24" and 48" lengths