EDCO Equipment Products at ACE Cutting Novi Michigan

EDCO SCARIFIERS - SURFACE PREPARATION MACHINES

EDCO CPM-8

Available for Rental at ACE Cutting Equipment-Novi, MI

EDCO CPM-8 Walk Behind Scarifier
Gasoline
NEW! 8" Push Model

EDCO CPM8 gasoline scarifier new model

Features
Specifications

Features
Edco CPM-8 - 8" Scarifier 9HP Honda engine.

• Up to 8" working width (20 cm.) Up to 1/8" working
  depth per pass (3 mm.)
• Power source over drum to eliminate vibration and   maximize surface contact
• Compact design Front-mounted lifting handle makes   loading and unloading easy
• Vacuum port equipped
• Water misting system standard Ideal for:
   - Sidewalk repair
   - Coating removal
   - Floor preparation or cleaning
   - Creating nonslip surfaces
   - Traffic line removal

• Performance: 350-500 sq. ft./hr - (33-46 sq. m./hr)
at a depth of 1/8" (3 mm.)
• 9 HP Gasoline Honda
• Working Width 8" (20 cm)
• Drum Assembly is Interchangeable
• Cutter Shafts for Drums 6 Drum Rotation Down-cut   Length-38" (97 cm) Width-19" (48 cm) Height-39" (99 cm)
• Weight-250 lbs (92 kg)

EDCO CPM-8 Technical Specifications
Motor
Power Options	9HP Honda gasoline engine

Cutting Equipment
Grinding Width	Up to 8" working width
Grinding Depth	(3 mm.) per pass

Permormance
Concrete Removal	350-500 sq. ft./hr

Blade
Drum Assembly is Interchangeable
Down-cut Length-38" (97 cm) Width-19" (48 cm) Height-39" (99 cm)

Weight
Weight	250 lbs (92 kg)

Ideal for: Sidewalk trip hazard repair Concrete and coatings removal Floor cleaning and/or preparations Creating non-slip surfaces Traffic line and markings removal

EDCO CPM-10

EDCO CPM-10
Gasoline
NEW! 10" Push Model

EDCO CPM10 gasoline scarifier new model

Features
Specifications

EDCO CPM-10 - 10" Scarifier

The new push model CPM-10 features a side loading large drum assembly and a 10" wide cut which removes 3/16"
per pass.

Features:

Side loading large drum assembly
10” wide cut which removes 3/16” per pass
13HP 2-cycle Gas Engine with 1/4” steel frame
Heavy-duty, oversized bearings
Weighs 299 lbs. with cutters
Teathered emergency stop switch
Larger 6” wheels in the rear for easy handling
Gasoline or Electric models available
Vacuum port standard for dust-free cuting
Tungsten carbide or steel cutters available

EDCO CPM-10 Technical Specifications
Motor
Motor	13 hp Honda gasoline engine
Grinding Width	Up to 10"

Cutting Equipment
Working Depth	3/16" per pass
RPM	2446

Dimensions
Large 6" rear wheels	Makes the unit easier to handle

- Features an emergency stop switch for safety
- Side loading drum assembly
- 1 year warranty

EDCO CPU-10

EDCO CPU-10
10" Self Propelled Scarifier - Gasoline
EDCO CPU-10 Scarifier

Features
Specifications

Features:
Edco CPU-10 - 10" Self Propelled Scarifier

10" working width will scarify approximately 500-750 sq. ft. per hour at Depth Per Pass of 1/8"
Adjustable depth control up to 3/16" working depth per pass
Upcut drum rotation and heavyweight construction increases production and lifts even the toughest floor coatings
Hydrostatic transmission with forward and reverse drive provides smooth speed changes and less operator fatigue
Includes lifting bail, oil alert and hour meter
Optional outrigger axle enables the CPU-10(FC)
to follow slab contours closely when working on uneven surfaces
Convertible hood design on CPU-10(FC) allows for multiple drum set-ups and provides easy access for quick drum changes

Ideal for:
- Parking deck and road repairs
- Factory floor preparation or cleaning
- Repairing mall floors

EDCO CPU-10 Technical Specifications
Engine Options
13HP Honda
10HP Electric 230/460V 3 Phase
20HP Honda

Cutting Equipment
Grinding Width	Up to 10" working width
Grinding Depth	1/8" per pass

Permormance
Concrete Removal	500-750 sq. ft./hr

Dimensions	L x W x H: 49 x 24 x 38.5 "

Weight	530 lbs

This unit is ideal for: Parking deck and road repairs Factory floor preparation or cleaning Repairing mall floors

EDCO CPU-12

EDCO CPU-12
Gasoline
12" Self Propelled Scarifier

EDCO CPU12 gasoline 12" scarifier

Features
Specifications

EDCO CPU-12 - 12" Self-Propelled Scarifier

With a working width to 12", the CPU-12 is for high production use in industrial plants, malls, dairy barns, roads or warehouses.

Features:

Up to 12" working width (30 cm.)
2-cycle Gas Engine
Adjustable to 1/4" working depth per pass (6 mm.)
Accommodates EDCO's largest cutters for longer life and more removal
Upcut drum rotation and heavyweight construction provide faster milling action and more uniform surface texture
Hydrostatic transmission with forward and reverse drive provides smooth speed changes and less operator fatigue
Hydraulic-powered engage/disengage lever lowers or raises drum from surface

Ideal for:

Planing concrete, asphalt, epoxies, elastomerics
and masterplate floors with ease
High production use in industrial plants, malls, dairy barns, roads or warehouses

Performance:

1,250-1,500 sq. ft./hr - (116-139 sq. m./hr) at a depth of 1/8" (3 mm.

EDCO CPU-12 Technical Specifications
Engine
Gasoline Engine Specifications	38 hp, 1600 RPM
Propane Engine Specifications	5-1/2 hp, 1740 RPM
Electric Motor Specifications	15 hp, 230V/460V, 2100 RPM

Cutting Equipment
Grinding Width	12"
Working Depth	1/4" per pass (adjustable)
Coverage	1250 to 1500 sq. ft. per hour (at 1/8" depth)

Benefits
- Equipped with a forward/reverse drive
- Hydrostatic transmission system
- Upcut drum action for more rapid milling
- Drum is controlled via hydraulic engagement lever
- 3 power options available
- 1 year warranty

Scarifier Machines

Scarifying machines apply a cutting wheel to the concrete surface. EDCO’s exclusive
6-shaft cutting drum flails the surface, leaving a clean, textured or roughened finish. Scarifiers are also referred to as planers, milling machines, rotary cutters or simply surface preparation machines. These versatile machines have various styles of interchangeable cutter assemblies that can be used for cleaning, grinding and light or heavy milling. Production rates range from 350
to 1,500 square feet per hour (dependent on machine size and HP) for a 1/8-inch removal depth of 3,500 PSI.

SURFACE PREPARATION MACHINES

EDCO SCABBLERS

Scabbler Machines

Scabblers use compressed air to hammer piston-mounted bits into the concrete surface roughening the concrete surface more than grinding or scarifying. EDCO’s Chip-Dek Scabbler can remove up to 1/4 inch of concrete surface in a single pass. The actual production rate depends on the strength of the concrete. A typical removal rate for a machine with a 12-inch working width is 200 to 250 square feet per hour at a 1/8-inch depth.

EDCO Model CD-3

EDCO CD-3
Air Powered
3 Headed Scrabbler

EDCO CD3 air powered 3 headed scabbler

Features
Specifications

CD-3 – Air-Powered, 3 Headed Scabbler

Features:

Delivers 1,200 hits per minute for fast surface removal
Requires only 100 CFM at 100 PSI
Heavy-duty 1/4" steel frame
2" Vacuum Port for dust-free operation
Automatic in-line oiler
WHIPCHEK Cable assures safe air hose hookup

Ideal for:

Removing spalling concrete
Roughening surfaces for new overlayments
Reducing high spots
Creating wheelchair access ramps
Removing epoxy
Creating slip-resistant surfaces
Texturing parking garage ramps
Removing loose or deteriorated concrete

Performance:

3 Scabbler heads remove 3/16" concrete per pass

EDCO CD-3 Technical Specifications
Specs
Power	Air
Air Power	100 CFM at 100PS
Phase	NA
RPM's	NA
Belts	NA
Length	41.5"
Width	21"
Weight	165 lbs

EDCO Model CD-5

EDCO CD-5
Air Powered
5 Headed Scrabbler

EDCO CD5 air powered 5 headed scabbler

EDCO CD-5

Features
Specifications

CD-5 – Air-Powered, 5 Headed Scabbler

Features:

Delivers 1,200 hits per minute for fast surface removal
Requires only 160 CFM at 100 PSI
Heavy-duty 1/4" steel frame
Wide T-Grip Handle and 8" wheels for superior balance and handling
3" Vacuum Port for dust-free operation
Automatic in-line oiler
WHIPCHEK Cable assures safe air hose hookup

Ideal for:

Removing spalling concrete
Roughening surfaces for new overlayments
Reducing high spots
Creating wheelchair access ramps
Removing epoxy
Creating slip-resistant surfaces
Texturing parking garage ramps
Removing loose or deteriorated concrete

Performance:

5 Scabbler heads provide 11 1/2" working width Remove up to 250 square feet of concrete per hour

EDCO CD-5 Technical Specifications
Specs
Power	Air
Air Power	160 CFM at 100PSI
Phase	NA
RPM's	NA
Belts	NA
Length	44"
Width	29"
Weight	278 lbs

EDCO Scarifier - Carbide, Steel & Tungsten Cutters

CPM-4 Accessories

Carbide Cutters

CP206-T #20156

1 3/4" OD x 5/8" ID x 1/4" Six point cutter, maximum cutter shaft 1/2". Long lasting, fast milling of concrete, asphalt or coatings.

CP205-T #20256

1 3/4" OD x 5/8" ID x 1/4" Five point cutter, maximum cutter shaft 1/2". Long lasting, fast milling of concrete, asphalt or coatings.

Steel Cutters

CP305 #20206

2" OD x 5/8" ID x 3/16"
12 teeth cutter, flat tip. General purpose removal of concrete or asphalt.

JRS501-P #12206

2" OD x 17/32" ID x 3/16"
18 teeth, pointed. Lightly scarify, clean surfaces, remove traffic lines

CPM-10 Cutters

Carbide Cutters - 6 Shaft Drum

CP308-T #20326

2 1/4" OD x 25/32" ID x 1/4" Six point cutter, long lasting, fast milling of concrete, asphalt or coatings.

Steel Cutters - 6 Shaft Drum

Scarifier carbide cutters 6 shaft drum 2"

CP305 #20206

2" OD x 5/8" ID x 3/16" 12 teeth cutter, flat tip. General purpose removal of concrete or asphalt.

Carbide Cutters - 8 Shaft Drum

CP206-T #20156

1 3/4" OD x 5/8" ID x 1/4" Six point cutter, maximum cutter shaft 1/2". Long lasting, fast milling of concrete, asphalt or coatings.

CPU-12 Cutters

Carbide Cutters

CP408-TV #20136

3 1/8" OD x 1 3/16" ID x 5/16" Eight point heavy duty cutter with oversized inner diameter. Max. cutter shaft 1" diameter. For heavy removal of concrete, asphalt or coatings

Steel Cutters

CP405 #20086 & CP 405-6 #20166

3" OD x 1" ID x 3/16"
15 teeth, flat tip. General purpose removal of concrete or asphalt.

CP405-P #20056

3" OD x 1" ID x 3/16"
15 teeth, pointed. Lightly scarify, remove laitance, clean surfaces.

Scarifier - Steel Cutters

CPM-8 Accessories

Carbide Cutters

CP206-T #20156

1 3/4" OD x 5/8" ID x 1/4" Six point cutter, maximum cutter shaft 1/2". Long lasting, fast milling of concrete, asphalt or coatings.

CP205-T #20256

1 3/4" OD x 5/8" ID x 1/4" Five point cutter, maximum cutter shaft 1/2". Long lasting, fast milling of concrete, asphalt or coatings.

Steel Cutters

CP305 #20206

2" OD x 5/8" ID x 3/16"
12 teeth cutter, flat tip. General purpose removal of concrete or asphalt.

JRS501-P #12206

2" OD x 17/32" ID x 3/16"
18 teeth, pointed. Lightly scarify, clean surfaces, remove traffic lines or remove coatings.

CPU-10(FC) Cutters

Carbide Cutters

Model CPU-10-FC (4 shaft drum)

CP408-TV #20136

3 1/8" OD x 1 3/16" ID x 5/16" Eight point heavy duty cutter with oversized inner diameter. Max. cutter shaft 1" diameter. For heavy removal of concrete, asphalt or coatings

Models CPU-10-FC (6 shaft drum)

CP308-T #20326

2 1/4" OD x 25/32" ID x 1/4" Six point cutter, long lasting, fast milling of concrete, asphalt or coatings.

Steel Cutters

Model CPU-10-FC (6 shaft drum)

CP404 #20076

2 3/8" OD x 1" ID x 3/16"
15 teeth, flat tip. General purpose removal of concrete or asphalt.

CP404-P6 #20296

2 3/8" OD x 1" ID x 3/16"
15 teeth, pointed. Lightly scarify or clean surfaces.

Models CPU-10-FC (4 shaft drum)

CP405 #20086 & CP 405-6 #20166

3" OD x 1" ID x 3/16"
15 teeth, flat tip. General purpose removal of concrete or asphalt.

CP405-P #20056

3" OD x 1" ID x 3/16"
15 teeth, pointed. Lightly scarify, remove laitance, clean surfaces.

Tungsten Carbide Cutters

Models CPM-4 & CPM-8

CP206-T #20156

1 3/4" OD x 5/8" ID x 1/4"
Six point cutter, maximum cutter shaft 1/2". Long lasting, fast milling of concrete, asphalt or coatings.

CP205-T #20256

1 3/4" OD x 5/8" ID x 1/4"
Five point cutter, maximum cutter shaft 1/2". Long lasting, fast milling of concrete, asphalt or coatings.

CP207-T

1 1/2" OD x 1/2 ID x 1/2"
Seven point special milling (solid carbide) cutter. Long lasting cutter that removes traffic markings and soft coatings.

Model CPU-10-C (6 shaft drum)

Scarifier tungsten cutters 2 5/8" 6 shaft drum

CP508-TV #20306

2 5/8" OD x 1" ID x 3/16"
Eight point cutter, long lasting, fast milling of concrete, asphalt or coatings.

Scarifier tungsten cutters 2 1/8" 6 shaft drum

CP404-TV #20286

2 1/8" OD x 1" ID x 1/4"
Six point cutter, long lasting, fast milling of concrete, asphalt or coatings.

Models CPU-10, CPU-12, CP-SX & CP-TX (6 shaft drum)
CPU-10-C (4 shaft drum)

Scarifier tungsten cutters 3 1/8" 6 shaft drum

CP408-TV #20136

3 1/8" OD x 1 3/16" ID x 5/16"
Eight point heavy duty cutter with oversized inner diameter. Max. cutter shaft 1" diameter. For heavy removal of concrete, asphalt or coatings

Model CPM-10 (6 Shaft Drum)

Scarifier tungsten cutters 1 3/4" 6 shaft drum

CP206-T #20156

1 3/4" OD x 5/8" ID x 1/4"
Six point cutter, maximum cutter shaft 1/2". Long lasting, fast milling of concrete, asphalt or coatings.

Model CPM-10 (8 Shaft Model)

Scarifier tungsten cutters 2 1/4" 8 shaft drum

CP308-T #20326

2 1/4" OD x 25/32" ID x 1/4" Six point cutter, long lasting, fast milling of concrete, asphalt or coatings.

Scarifier Cage Removal & Installation

Cage Removal/Installation	Cage with Carbide Cutters	Cage with Steel Cutters

EDCO Scabbler Cutters

Scabbler Accessories

5-Point Bit

The 5-Point Bit penetrates the surface up to 1/4" per pass and leaves a rough texture.

Ideal for

Breaking up blistered or spalling concrete
Removing floor coatings
Roughening the surface to create a bond for repairs or overlays
General Surface Removal

9-Point Bit

The 9-Point Bit penetrates the surface up to 1/8" per pass and leaves a medium texture.

Ideal for

Creating excellent bonding texture for thin overlays of polymer concrete, epoxy or urethane
Leveling uneven joints
Surface removal for repairing spalled and deteriorated slabs

Scabbler Bit Removal Tool

This bit removal slide hammer will assist you in removing your old bits from either Scabbler.

How to Use a Scabbler

EDCO Scabblers are easy to use. The operator moves the scabbler back and forth using a side to side motion over the surface until the concrete is roughened or removed. A scabbler is the ideal machine for roughening surfaces for new overlays, creating wheelchair access ramps, creating non-slip surfaces and removing loose or deteriorating concrete.

Scabbler accessories include 5-Point and 9-Point Tungsten Carbide Bits. These scabbler bits pound the concrete surface by delivering 1,200 hits per minute. The 5-Point bit leaves a rough textured surface while the 9-Point bits leaves a medium textured surface.

EDCO - MASONRY SAWS - GASOLINE

EDCO Masonry Saw GMS-14A

EDCO GMS-14A
Gasoline

NEW! Portable 14"

EDCO GMS14A portable Masonry Saw 14"

Features
Specifications

Features: NEW! Model GMS-14A Masonry Saw

Ideal for
• Professional masons, paver installers, paver
manufacturers, landscape suppliers, masonry
suppliers and rental stores

Features

• Portable model with 14” blade capacity
• Large-capacity, 3 stage air filter protects
engine from wear
• Adjustable cutting head can be used manually
or locked in a fixed position
• 2-cycle Gasoline powered engine

GMS-14A Technical Specifications
Motor
Power Options	5.5 HP, 6.5 HP or 9 HP


Cutting Equipment
Length	39.50” (100 cm) Weight: 206 lbs. (94kg)


Dimensions
Height on Stand	73” (185 cm)

Blade
Blade Capacity	14”
Water Feed	Belt driven water pump
Cutting Head	Cutting Head: Spring return

EDCO Masonry Saw GMS-20

EDCO GMS-20
Gasoline

Freestanding with 14" to 20" Capacity

EDCO GMS20 freestanding Masonry Saw 20"

Features
Specifications

Features: Model GMS-20 Masonry Saw

Ideal for:
• Professional masons, paver installers, paver
   manufacturers, landscape suppliers, masonry
   suppliers and rental stores.

Features
• Freestanding model with 14” to 20” blade capacity
• Large-capacity, 3-stage air filter protects
   engine from wear
• Belt-driven diaphragm water pump is standard
   and can be disconnected when cutting dry
• 2-cycle Gasoline powered engine
• Fixed or adjustable cutting head for extra versatility
• Extra-large rolling table supports large materials
   and rolls easily
• Double-sided table rails are easy to replace
• Standard foot pedal for hands-free operation
• Vacuum hookup optional for dust-free cutting
• Patented fixed engine platform

GMS-20 Technical Specifications
Motor
Power Options	9 HP or 11 HP


Cutting Equipment
Length	58.5” (149 cm) Width: 26” (66 cm)


Dimensions
Height on Stand	75.5” (192 cm) Weight: 480 lbs. (218 kg)

Blade
Blade Capacity	14”- 20”
Water Feed	Belt driven water pump
Cutting Head	Foot pedal spring return

Content on this page requires a newer version of Adobe Flash Player.