ICS GAS & HYDRAULIC CHAINSAWS

ICS Model 695 F4 - Chainsaw

(This saw is also available for Rental)

ICS 695F4 12" Utility Chain Saw

GET a FREE ICS 16" Bar & Chain with SPECIAL BUY!

ICS Chain Saw
ICS 695F4 Cahin Saw

Features
Specifications

ICS 695F4 Utility Chain Saw

Over 20 years of ICS product innovation and experience culminating in the latest addition to our gas saw family. Everything that makes chain saws the preferable method
in cutting concrete, stone, and masonry wrapped in a hungry, power filled package called the 695GC and the 695F4. All the great features from past ICS chain saws
plus a few new innovations to make your day go a little easier. Deep, straight cuts and square corners with ease
of use and dependable performance to match. If cutting concrete, stone, masonry or ductile iron pipe is your game – the ICS 695GC and 695F4 are your GAME CHANGERS.

FEATURES & BENEFITS
• Use on concrete, stone and masonry
• Square corners
• Narrow deep cutting up to 16 in. (40 cm)
• Small openings
• 94 cc gas powered engine
• Safe, no gyroscopic rotation

695F4 PRODUCT SPECIFICATIONS
WEIGHT	21 lbs/9.6 kg (without bar and chain)
BAR LENGTH	Up to 16" (40 cm)
ENGINE SPEED	9300 +/- 150 rpm max, 2700 rpm idle
HORSEPOWER	6.4 @ 9000 rpm
ENGINE TYPE	2-stroke, single cylinder, air cooled
DISPLACEMENT	5.7 cu. inch (94cc)
POWERHEAD DIMENSIONS	19"L x 14"H x 12"W (48 cm x 36 cm x 30 cm)
VIBRATION LEVEL	3.9/4.1 meters/sec2 (front/rear handle)
WATER SUPPLY	Minimum 20 psi (1.5 bar)
FUEL MIX RATIO	25:1 (4%) fuel-to-oil
FUEL CAPACITY	0.26 gal (1.0 liter)

ICS Model 680GC - Gas Chainsaw

ICS 680GC
Makes Cuts that no Circular Cut-Off Saw can Make!

ICS 680GC gas concrete chainsaw

The ICS 680GC in Action!

Features
Specifications

Features: ICS Model 680GC

A Whole Different Animal

The 680GC is the much anticipated revolution in concrete chain saws. Built to be the most reliable gas saw ICS^®
has ever produced, it’s packed with innovations.

The distinctive black powerhead houses redesigned carburetion and ignition systems that work together to ensure easy starting, cooler operation, and dependable performance at just about any elevation.

Improved airflow design keeps the engine much cooler, extending its life. Available with 12” (30 cm) and 14” (35 cm) guidebars and the entire line of TwinMAX™ diamond chain.

ICS 680GC PRODUCT SPECIFICATIONS
WEIGHT	21 lbs (9.5 kg) with bar and chain
BAR LENGTH	12-inch (30 cm), 14-inch (35 cm)
ENGINE SPEED	11500 +/- 500 rpm, 2800-3200 rpm idle
HORSEPOWER	5.7 hp (4.2 kW) @ 9000 rpm
ENGINE TYPE	2-stroke, single cylinder, air cooled
DISPLACEMENT	4.9 cu. Inch (80 cc)
CHAIN SPEED	5300 fpm (27 m/s), free running
POWERHEAD DIMENSIONS	18 inches (45 cm) Length 11.5 inches (29 cm) Height 10 inches (25 cm) Width
NOISE LEVEL	100 dB @ 3 ft (1 m)
VIBRATION LEVEL	10.5 meters/second² (front handle)
WATER SUPPLY	Minimum 20 psi (1.5 bar)
FUEL MIX RATIO	25:1 (4%) fuel-to-oil
FUEL CAPACITY	0.23 gal (.88 liter), 15-18 minutes run time per tank

ICS 880 Force 4 - Chainsaw

ICS 880 Force 4 Chain Saw
Hydraulic

(This saw is also available for Rental)

ICS 880 Force 4 Chain Saw

Features
Specifications

F880F4 - A Great Saw with a Bad Attitude!

The new 880F4 cutting system offers the superior strength of FORCE4™ technology in a package that meets industry standards of design and ergonomics. Built for the hardcore cutter, this sleek powerhouse is packed with features designed to make it the hardest working saw ICS® has ever made.

Features of the ICS 880 FORCE 4 PRO:Hydraulic
• Fast, efficient and versatile
• Cuts mechanical openings quickly and perfectly
• Narrow, straight plunge cuts up to 25 inches deep
• Perfect square corners
• Safe, reliable and easy to maintain
• Chain tensioning system is guaranteed for life of saw
• 11.5 hp - Low cost of operation
• Safety operating trigger prevents accidental starting
• Automatic water valve integrated with hydraulic trigger    provides water on demand
• Built-in WallWaker provides leverage advantage for    easier cutting
• Modular design for easy service
• Ergonomic rear handle allows multiple hand positions
• This sleek powerhouse is packed with features designed    to make it the hardest working saw ICS® has ever made

880F4 PRODUCT SPECIFICATIONS - 8 GPM
WEIGHT	27.3 lbs (12.4 kg) with 15-inch (38 cm) bar and chain
BAR LENGTH	Up to 25 inches (63 cm)
MOTOR SPEED	6100 rpm
POWERHEAD DIMENSIONS	23 inches (58.5 cm) length 10.5 inches (26.5 cm) height 9.5 inches (24 cm) width
TORQUE	122 in-lbs
HORSEPOWER	11.5 hp
HYDRAULIC SUPPLY	8 gpm (30 lpm), 2500 psi (172.5 bar)
NOISE LEVEL	88 dB @ 3 ft (1 m)
VIBRATION LEVEL	4 meters/second2 (front handle)
WATER SUPPLY	Minimum 20 psi (1.5 bar)

• Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply

ICS 880 Force 4 FL - Hydraulic Chainsaw

ICS 880 Force 4-FL
Hydraulic

Features
Specifications

Features:

ICS 880 Force 4-FL
When you’re in a tight spot, choose the 880F4-FL. The unique flush-cut design of these saws allows them to cut within 3/16 inches (4.8 mm) from walls or floors, bringing the precision of Diamond Chain Technology™ to a new level. Available in both 8 and 12 gpm models.

880F4-FL PRODUCT SPECIFICATIONS - 8 GPM
WEIGHT	27.3 lbs (12.4 kg) with 15-inch (38 cm) bar and chain
BAR LENGTH	Up to 25 inches (63 cm)
MOTOR SPEED	5700 rpm
POWERHEAD DIMENSIONS	23 inches (58.5 cm) length 10.5 inches (26.5 cm) height 9.5 inches (24 cm) width
TORQUE	130 in-lbs
HORSEPOWER	11.5 hp
HYDRAULIC SUPPLY	8 gpm (30 lpm), 2500 psi (172.5 bar)
NOISE LEVEL	88 dB @ 3 ft (1 m)
VIBRATION LEVEL	4 meters/second2 (front handle)
WATER SUPPLY	Minimum 20 psi (1.5 bar)

• Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply.

ICS SpeedHook® Bracket

Click here for SpeedHook Video Demo

ICS Speedhook

Features
Specifications

ICS - SpeedHook makes it Easy!

SpeedHook - Less Operator Effort
SpeedHook® is an ingenious accessory that attaches
quickly and supports the weight of your saw to
dramatically reduce operator fatigue. SpeedHook
increases saw stability during cutting and also
increases chain life.

Fast, efficient and versatile
• Extremely inexpensive (compared to wall saws)
• Simple and easy to use
• Lightweight 18 lbs (8 kg)
• Adjustable, two anchor mounting
• Convertible left or right side use
• Expandable 42” (105 cm)
• Stable cutting increases diamond chain life
• Cuts mechanical openings quickly and perfectly

ICS SpeedHook® Bracket

SpeedHook - Less Operator Effort
SpeedHook® is an ingenious accessory that attaches
quickly and supports the weight of your saw to
dramatically reduce operator fatigue. SpeedHook
increases saw stability during cutting and also
increases chain life.

Fast, efficient and versatile
• Extremely inexpensive (compared to wall saws)
• Simple and easy to use
• Lightweight 18 lbs (8 kg)
• Adjustable, two anchor mounting
• Convertible left or right side use
• Expandable 42” (105 cm)
• Stable cutting increases diamond chain life
• Cuts mechanical openings quickly and perfectly

ICS DIAMOND CHAINS & BLADES

For Cutting Concrete, Masonry, Stone, Concrete Pipe and Asphalt

MAX Series Diamond Chains
Patented bumper design for smooth cutting performance. MAX series diamond chains are designed to be the best general purpose chains for ICS brand gas concrete saws.

PRO Series Diamond Chains
Engineered for the highest possible performance, these are the chains the PRO Cutters prefer. The PRO Series also includes the new PRK™ diamond chain cutting system for revolutionary cutting speed and precision.

Guidebars
Genuine ICS guidebars, replacement parts and other accessories keep you cutting at peak efficiency.

ICS Diamond Blades
• Broad selection to cut concrete, masonry, stone, concrete, pipe, asphalt and many other materials
• Two quality levels: General Purpose for multi purpose cutting & Economy for budget-minded cutting
• MBS™ Series top grade diamonds
• 20 mm arbor hole with knockout for 1"
• Complies with ANSI B7.1 and B7.5 safety standards

ICS DIAMOND CHAIN CHART

For Cutting Concrete, Masonry, Stone, Concrete Pipe and Asphalt

ICS Chains and Guidebars Reference Chart 1

MAX Series Diamond Chains
Patented bumper design for smooth cutting performance. MAX series diamond chains are designed to be the best general purpose chains for ICS brand gas concrete saws.

PRO Series Diamond Chains
Engineered for the highest possible performance, these are the chains the PRO Cutters prefer. The PRO Series also includes the new PRK™ diamond chain cutting system for revolutionary cutting speed and precision.

Guidebars
Genuine ICS guidebars, replacement parts and other accessories keep you cutting at peak efficiency.

ICS Diamond Blades
• Broad selection to cut concrete, masonry, stone, concrete, pipe, asphalt and many other materials
• Two quality levels: General Purpose for multi purpose cutting & Economy for budget-minded cutting
• MBS™ Series top grade diamonds
• 20 mm arbor hole with knockout for 1"
• Complies with ANSI B7.1 and B7.5 safety standards

ICS CHAINSAW MAINTENANCE TIPS

PROPER CHAIN TENSION
If the chain is too loose, it could come off the bar, or it will allow the drive sprocket to spin without turning the chain, which can chew up the chain drive links. If the chain is too tight, a lot of the saw’s power goes into turning the chain rather than into the cut. In extreme over-tightened cases, the saw may not be able to turn the chain at all. In addition, damage can occur to the bar nose and premature stretch may occur.

HOW TO CHECK
Before cutting, check for proper tension by pulling the chain around the bar by hand. If you cannot easily pull by hand, the chain is too tight and needs to be loosened.

WHEN TO TENSION
All chains have a tendency to stretch when used. Diamond chains stretch more than wood cutting chains because of the abrasive materials they are cutting. When a chain stretches to a point where the drive links are hanging approximately 1/2"- 3/4" (12 - 18 mm)** below the bar, it’s time to tension the chain.

HOW TO TENSION
To tension the chain, first loosen the side cover nuts, then while holding the nose of the bar up, use a screw driver to turn the tensioning screw clockwise until the chain drive links hanging below the bar are just beginning to enter the bar groove. Continue to hold up on the nose of the bar and firmly tighten the side cover nuts, (20 ft-lbs, 27 Nm). And remember, it’s the side cover nuts that hold the bar in position.

HOW TO PREVENT CHAIN TENSIONER BREAKAGE
Do not attempt to adjust the tensioner without first loosening the side cover nuts. Do not use the saw without making sure the side cover nuts are tight. If the side cover nuts are not tight, the bar can slip backwards during cutting and break the tensioner pin.

ADDITIONAL INFORMATION
Concrete cutting chainsaws operate with looser chain tension than wood chainsaws. It is common, especially on gas powered, concrete cutting chainsaws to have the drive links hang completely out of the bar. Wood cutting chainsaws use oil to lubricate the chain. The oil makes the chain very slippery and allows the drive links to fully nest between the teeth of the drive sprocket.

Concrete cutting chainsaws require water for cooling and flushing the cut. Water is not as good as oil as a lubricant. Also, there are concrete particles mixed in with the water. As a result, sometimes the drive links do not nest properly on the drive sprocket. When this happens, the chain acts like it got tighter. There seems to be “tight” spots and “loose” spots as you pull the chain around the bar. If you tension when the chain is in one of the loose spots, it will be too tight at some point in it's rotation around the bar. Rotating the chain completely around the bar by hand will let you know you have the chain properly tensioned.

ADDITIONAL TENSIONING TIPS:
1. To reduce chain stretch and tensioning downtime, use 20 psi (1.4 bar) or greater water pressure.
2. Oil the chain at the end of the day to prevent rust but be careful not to over tension in this condition.
3. When pulling the chain around the bar by hand, be careful not to touch the bar with thumb or forefinger.
4. The bar rails can be very sharp. Grab only the diamond segments to pull the chain.
5. Always pull the chain away from the Wallwalker®. The point of the Wallwalker® can also be very sharp.
6. Always turn the engine off before tensioning the chain.
tensioning tips

Additional ICS Chainsaw Tips
ICS Daily Maintenance Tips	ICS Chainsaw Cutting Tips

ICS POWER PACKS

ICS P-95 (5-8 GPM) - Gas Powered

Model P-95 (5-8 GPM)
Multiflow Power Pack - Gasoline

ICS P95 Power Pack gasoline

ICS - P/N 509860
P95 Multiflow Hydraulic Powerpack

A dependable self Contained source of hydraulic power that is easilytransportable to any job site. You can set
the flow rate to either 5gpmor 8 gpm to power the ICS 814PRO, 853PRO, or 880F4 hydraulicchainsaws. As
well as a wide variety of other hydraulically powered
equipment.

Features
Specifications

ICS P-95 Multiflow Power Pack

Improvements for the P95 include:

• Superior Cooling
• Auto-Idle capable
• Ergonomic design for ease of use
• Engine over-speed shut-down
• Low oil shut-down
• Tool circuit lock-out during start up
• Load compensating hydraulic flow
• Easier fuel tank removal
• Easier hydraulic tank removal
• Larger fuel capacity
• Self contained source of hydraulic power
• Delivers superior cooling capacity
• Easy to transport to job sites with handle & wheels
• Engine: Briggs & Stratton, 18HP V-Twin, air cooled
• Electric Start
• Engine/motor type: 2-cycle Gas engine
• Fuel capacity: 7 gal (26.5 liters)
• Hydraulic System: 8 gpm at 2,500 psi (172 bar)
or 5 gpm at 2,500 psi (172 bar)
• Reservoir: 2.7 gal (11 liters)
• Relief valve setting: 2,100-2,300 psi (145-158 bar)
• Dimensions: Length: 33", Width: 21.5", Height: 29"
• Weight: 230 lbs.

ICS P-95 Power Pack Specifications
Specs
Self contained source of hydraulic power
Delivers superior cooling capacity
Easy to transport to job sites

Engine
Briggs & Stratton	18HP V-Twin, air cooled
Engine/motor type	2-cycle Gas engine
Fuel capacity	7 gal (26.5 liters)
Electric Start

Hydraulic System	8 gpm at 2,500 psi (172 bar) or 5 gpm at 2,500 psi (172 bar)
Reservoir	3 gal (11 liters)
Relief valve setting	2,500 psi (172 bar)
Hydraulic Oil	SAE 10WT

Dimensions:	Length 33", Width: 21.5", Height: 29"

Weight
Weight	216 lbs.

ICS P-110 (8-12 GPM) - Gas Powered

Model P-110 (8-12 GPM)
Multiflow Power Pack - Gasoline

ICS P95 Power Pack gasoline

ICS - P/N 526103
P110 Multiflow Hydraulic Powerpack
Step up to the power of the newest addition to the ICS line of reliable powerpacks. Adjustable to 8 gpm or 12 gpm
(30 lpm or 45 lpm) operation.

Features
Specifications

ICS P-110 Multiflow Power Pack

Features:
• Superior Cooling
• Auto-Idle capable
• Ergonomic design for ease of use
• Engine over-speed shut-down
• Low oil shut-down
• Tool circuit lock-out during start up
• Load compensating hydraulic flow
• Easier fuel tank removal
• Easier hydraulic tank removal
• Larger fuel capacity
• Self contained source of hydraulic power
• Delivers superior cooling capacity
• Easy to transport to job sites with handle & wheels
• Engine: Briggs & Stratton, 23HP V-Twin, air cooled
• Electric Start
• Engine/motor type: 2-cycle Gas engine
• Fuel capacity: 7 gal (26.5 liters)
• Hydraulic System: 8 gpm at 2,500 psi (172 bar)
or 12 gpm at 2,500 psi (172 bar)
• Reservoir: 3 gal (11 liters)
• Relief valve setting: 2,100 / 145 bar
• Full relief setting: 2500 psi / 172 bar
• Dimensions: Length: 36", Width: 23", Height: 29.5"
• Weight: 330 lbs.

ICS P-110 Power Pack Specifications
Specs
Self contained source of hydraulic power
Delivers superior cooling capacity
Easy to transport to job sites

Engine
Briggs & Stratton	23HP V-Twin, air cooled
Engine/motor type	2-cycle Gas engine
Fuel capacity	7 gal (26.5 liters)
Electric Start

Hydraulic System	8 gpm at 2,500 psi (172 bar) or 5 gpm at 2,500 psi (172 bar)(Also available at 12gpm - Gas)
Reservoir	3 gal (11 liters)
Relief valve setting	2,100-2,300 psi (145-158 bar)
Dimensions:	Length 36", Width: 23", Height: 29.5"

Weight
Weight	330 lbs.

ICS - P/N 526103 P110 Multiflow Hydraulic Powerpack Step up to the power of the newest addition to the ICS line of reliable powerpacks. Adjustable to 8 gpm or 12 gpm (30 lpm or 45 lpm) operation.

ICS - P/N 526103
P110 Multiflow Hydraulic Powerpack
Step up to the power of the newest addition to the ICS line of reliable powerpacks. Adjustable to 8 gpm or 12 gpm
(30 lpm or 45 lpm) operation.