Metabo Power Tools at ACE Cutting Equipment Novi, MIchigan MI

METABO ANGLE GRINDERS

Metabo PWE 11-100 WET POLISHER

Matabo PWE 11-100
4 1/2" Wet Polisher

Metabo PWE 11-100 wet polisher

Total control while you polish.
Check it out Now!!!

Features
Specifications

Matabo PWE 11-100 - 4 1/2" Wet Polisher

FEATURES:
• For powerful wet polishing of granite, marble and other    types of stone
• External water supply at the bottom of the housing for    optimal handling
• Safe working thanks to splash-proofed housing with    front cap.
• Additional electrical safety thanks to safety switch    integrated in the cable
• Robust long lasting Metabo Marathon Motor die cast    aluminium gear housing
• Adjustable U-shaped handle for uniform machine    guidance
• Metabo dust-protection technology for an extremely    long tool life
• Vario Tacho Constamatic (VTC) full-wave electronics
• Thumbwheel for preselection of speed
• Electronic soft start overload protection
• Metabo winding protection grid spindle lock auto-stop    carbon brushes
• Bow type handle

Matabo PWE 11-100 Technical Specifications
Torque	4 in-lbs
For backing pad up to maximum	5 "
Idle revolution	1700 - 6100 /min
Rated input power	1100 W
Output power	630 W
Revolutions at rated load	6100 /min
Spindle thread	5/8" - 11 UNC
Weight (without power cable)	4.9 lbs

Metabo WE 14-150

Metabo WE 14-150
6" Angle Grinder

WE-14-150--Metabo-6-inch

Features
Specifications

Metabo WE 14-150 - 6" Angle Grinder

FEATURES:
• Robust long lasting Metabo Marathon Motor
• Metabo dust-protection technology for an extremely    long tool life die cast aluminium gear housing
• Metabo S-automatic torque limiting clutch
• Metabo "Quick" tool quick change
• Additional Metabo VibraTech (MVT) handle for
vibration damping
• Twist-proof protective cover, can be adjusted within    seconds without tools
• High torque
• Vario Tacho Constamatic (VTC) full-wave electronics
• Thumbwheel for preselection of speed
• Electronic soft start overload protection
• Metabo winding protection grid no-volt release switch
• Highly durable switch-off carbon brush with dust    protection housing

Matabo WE 14-150 Technical Specifications
Grinding wheel	6 "
Idle revolution	6000 - 9000 /min
Rated input power	1450 W
Output power	830 W
Revolutions at rated load	9000 /min
Spindle thread	M 14

Metabo Model W23-180

Matabo W24-180
7 " Angle Grinder

W24-180-7-inch-Metabo Grinder-ace-cutting

Features
Specifications

Metabo W24-180 - 7" Angle Grinder

FEATURES:
• Machine is suitable for operation with 120-Volt direct    current (protective low current)
• Robust Metabo Marathon motor
• Metabo winding protection grid
• High efficiency and increased torque through optimum    heat dissipation
• Metabo safety switch: safety lock against unintentional    start
• Twist-proof protective cover, can be adjusted within    seconds without tools
• Metabo VibraTech (MVT): Reduction in the health risks    caused by hand-arm vibration thanks to the integrated    shock systems
• Additional handle adjustable according to application:    left, right or upwards
• Die cast aluminium gear housing
• Main handle rotatable without tools
• Auto-stop carbon brushes

Matabo W24-180 Technical Specifications
Grinding wheel	7 in.
Idle revolution	8500 /min
Revolutions at rated load	5800 /min
Spindle thread	5/8" - 11 UNC
Weight (without power cable)	12.6 lbs

Metabo Model W24-230

Matabo W24-230
9 " Angle Grinder

Matabo 9 " Grinder - Model W24-230

Features
Specifications

Metabo W24-230 - 9" Angle Grinder

FEATURES:
• Machine is suitable for operation with 120-Volt direct    current (protective low current)
• Robust Metabo Marathon motor
• Metabo winding protection grid
• High efficiency and increased torque through optimum    heat dissipation
• Metabo safety switch: safety lock against unintentional    start
• Twist-proof protective cover, can be adjusted within    seconds without tools
• Metabo VibraTech (MVT): Reduction in the health risks    caused by hand-arm vibration thanks to the integrated    shock systems
• Die cast aluminium gear housing
• Main handle rotatable without tools
• Auto-stop carbon brushes

Matabo W24-230 Technical Specifications
Grinding wheel	9 in.
Idle revolution	6600 /min
Revolutions at rated load	4600 /min
Spindle thread	5/8" - 11 UNC
Weight (without power cable)	12.8 lbs

METABO ROTARY HAMMERS

Metabo KHE32

Metabo KHE32
1-1/4" SDS Rotary Hammer w/Rotostop

Metabo KHE32 Rotary Hammer 1-1/4"

Features
Specifications

Metabo KHE32 Rotary Hammer w/Rotostop

FEATURES:

• In concrete using solid bits 1 1/4"
• In mild steel 5/8"
• In softwood 1 9/16"
• Single blow energy (measured in joules) 0-3.5
• Suitable for light chiselling work (15 settings)
• Long lasting motor
• Quick-change chuck system
• Carbon brush wear indicator
• No load speed: 0-780 BPM
• Blows per minute 0-3800 BPM
• Amps: 7.5
• Rated input watts 900
• Tool Weight: 10.5 lbs.
• Length 15"
• Carrying case is Standard

KHE32 Technical Specifications

Torque	221 in-lbs
Drilling diameter	Concrete with hammer bits 1.25"
No-load speed	0 - 780 /min
Rated current	8 AMPS
Rated input power	900 W
Output power	480 W
Rated load speed	780 /min
Maximum impact rate	3800 /min
Single-blow energy	0 - 3.5 JJ
Bit retainer	SDS-plus
Weight (without mains cable)	7.9 lbs

Metabo Model KHE55

Metabo KHE55
1-9/16" SDS-Max Rotary Hammer

Metabo KHE55 Rotary Hammer 1-9/16"

Features
Specifications

Metabo KHE55 Rotary Hammer

FEATURES:

• In concrete using solid bits 1 9/16"
• In concrete using core bits 4"
• Single blow energy (measured in joules) 1-9.0
• Vibration damping construction
• Variable speed controlled by adjustment dial
• Suitabe for self drilling anchors
• Suitable for chiselling work (8 settings)
• Matabo slip clutch
• Rubber coated handles
• No load speed: 135-275 BPM
• Blows per minute 1300-2600 BPM
• Amps: 9.6
• Rated input watts 1050
• Tool Weight: 16.9 lbs.
• Length 18 1/2"
• Carrying case is Standard

KHE55 Technical Specifications

Drive Size	1 9/16 in
Drive Type	SDS Max
Amps	9.60 A
Watts	1050.00 W [Max]
Speed	135 rpm [Min], 275 rpm [Max]
Cycle Rate	1300 blows/min [Min], 2600 blows/min [Max]
Length	18 1/2 in

Includes Side Handle, Depth Gauge, Grease, Cleaning Cloth, Carrying Case

Metabo Model KHE75

Metabo KHE75
1-3/4" SDS-Max Rotary Hammer

Metabo KHE75 SDS Rotary Hammer 1-3/4"

Features
Specifications

Metabo KHE75 Rotary Hammer

FEATURES:

• In concrete using solid bits 1 3/4"
• In concrete using core bits 5"
• Single blow energy (measured in joules) 1-10.0
• Vibration damping construction
• Variable speed controlled by adjustment dial
• Suitabe for self drilling anchors
• Suitable for chiselling work (8 settings)
• Matabo slip clutch
• Carbon brush wear indicator
• Rubber coated handles
• No load speed: 140-280 BPM
• Blows per minute 1325-2600 BPM
• Amps: 10.5
• Rated input watts 1150
• Tool Weight: 15.5 lbs.
• Length 18 1/2"
• Carrying case is Standard

KHE75 Technical Specifications

Capacity in concrete using solid bits	1-3/4 in.
Capacity in concrete using core bits	5 in.
RPM	140-280
Blows per minute	1,325-2,600
Amps	10.5
Rated input watts	1,150
Tool weight	15.5 lbs
Shipping weight	26 lbs
Length	18-1/2 in.