Whats New at ACE Cutting Equipment & Supply Novi, Michigan MI

		ACE CUTTING EQUIPMENT - NEW PRODUCT Whether it's your driveway or an airport runway, APS Rapid Set delivers you the permanent results you deserve under any budget. APS RAPID SET Fix It Right the First Time!

		CoreCut CG-1/CG-2 Mini Groover - Gasoline Ideal of smaller jobs! • Affordable and compact grinding, grooving and texturing machine • Useful for creating textured anti-slip areas for improved traction • CG1 - 10" wide grinding head capacity • CG2 - 16" wide grinding head capacity • Hydrostatic transmission • Maneuverable in hard to reach areas • Power raise and lower system

DS-301 Hand Held Polisher - Electric

Rugged, hand-operated 12 inch platform that grinds,
hones and polishes concrete surfaces.

•Uses 3 diamond polishing pads or cup wheels.
•Operates wet or dry (with use of optional cowl).
•'Planetary' gear-driven tool
•12 inch platform turns at a lower rate than the higher
   rotational speed (> 2000 rpm) of the 5 inch platens.
•This rpm speed provides the best speed for diamond
   polishing, producing a perfect finish 5 times faster than
   a single head polisher.
•Unit is powered by a heavy duty FEIN variable
   speed polisher.
• Center coolant feed -Precision bearings -Sturdy construction

Husqvarna K3000 Cut and Break Saw

Click here for Husqvarna Products

K3000 Cut n' Break Saw - Electric

Husqvarna K3000Cut n' Breakis a completely new electric power cutter, featuring our unique Cut-n-Break method which allows you to make cuts up to 16" deep, at a very low tool cost.

• Specially developed, twin 9" blades provide high cutting speed and power.
• The ergonomic front handle facilitates both vertical and horizontal cutting.
• Convenient, patented design of the rear handle makes operation easier.
• Elgard™, the advanced electronic overload protection
   system, varies the rotation speed to warn of an
   approaching overload
• Electronic Softstart™ provides starting with normal, slow-acting fuses.
• Well dimensioned bevel gear brings high durability,
   minimal power loss and low noise level

Click here for Husqvarna Products

K3000 Hand Held Wet Saw - Electric

Husqvarna K3000 Electric is one of the market’s most powerful and versatile electrical cutters.

• Makes the work easier.
• For safe control and reduced load.
• Makes both vertical and horizontal cutting easier.
• Allows dust to be vacuumed while cutting.
• Perfect for cutting both indoor and outdoor.
• Well dimensioned bevel gear brings high durability,
minimal power loss and low noise level

14" Rescue Ring Blade
Propane Saw FS400

Multi-Purpose Rescue / Utility Ring Saw Blade

BLADE APPLICATION:
Multi-Purpose rescue blade
incorporates vacuum brazed
segments mounted on a Ring
Saw core, which is ideal for
cutting a variety of materials.

Husqvarna FS 400 Flat Saw - Propane

Ideal of smaller jobs!
• Versatile all-around Flat Saw
• Modified to run on with Propane fuel with Catalytic Converter
• Bladeshaft RPM 2,800
• Maximum depth of cut 6-5/8"
• Poly V-belt for optimal transmission of power
• Blade Control: Screw feed
• Blade coolant: Water supply connector and valve on blade guard
• Depth of cut indicator can be adjusted for different diameter blades

Arbortech - AS170 Brick + Mortar Saw

Cut Deep	It is the only small, handheld saw that is able to cut to depths of 120mm (plunge blade) in masonry materials
Cut Square:	It is able to cut square corners, requiring no over-cutting or bolstering
Cut Safe:	It does not throw dust and there is no kickback
Cut Dry:	It cuts masonry materials dry, with significantly less respirable dust than disc cutters

Click here for ICS 680GC Special BUY

ICS - 680GC Gasoline Chain Saw

A Whole Different Animal

The 680GC is the much anticipated revolution in concrete chain saws.
Built to be the most reliable gas saw ICS^® has ever produced, it’s packed with innovations.

The distinctive black powerhead houses redesigned carburetion and ignition systems that work together to ensure easy starting, cooler operation, and dependable performance at just about any elevation.

Improved airflow design keeps the engine much cooler, extending its life. Available with 12” (30 cm) and 14” (35 cm) guidebars and the entire line
of TwinMAX™ diamond chain.

		Husqvarna - K760 Gasoline Cutoff Saw • The new Active Air Filtration is one of the most efficient air filtration systems on the market, delivering operational times (dry cutting) of about one year with no filter service required. • Engine with X-Torq produces more power, higher torque and 75% fewer emissions. • SmartCarb, a built-in automatic filter compensation, maintains high power and lowers fuel consumption. DuraStarter, the dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and service life.

		Husqvarna - K970 replaces the K960 • Cuts concrete and masonry in alteration, renovation and new construction work. • The Active Air Filtration™ has been upgraded with a redesigned paper filter, for better dust control. • With the new cast aluminium ground support, featuring replaceable rubber pads, the K 970 is especially stable when placed on the ground.

Makita Model DPC8112 - 16" Power Cutter

Five-Stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw performance.

•

Tsurumi - NEW TPG3 SERIES - Built for Work!

• Models: 7000HDX
• Designed to withstand severe conditions
• Versitile supply for on-site stable power
• Max Rated Output: 6800/6000 watts
• Max Rated Current: 56.7/50, 28.3/25
• Voltage: 120/240 (60Hz)

Other Available Models:
Model 6000HDX: 5500/4800 watts - Max Current: 45.8/40, 22.9/20
Model 4500HDX: 4500/3600 watts - Max Current: 37.5/30, 18.8/15
Model 3000HDX: 2800/2400 watts - Max Cuttent: 23.3/20

GT49 Green Concrete Diamond Blade

Blade Features:
One Pass Joint Sawing saves you time and money! It's more efficient to saw joints and sealant reservoirs in one pass using a "T-style" blade. The unique design eliminates the widening operation, dual crews, joint washing and more. In green concrete or asphalt ,
the reservoir is centered on cut without spalling or raveling.

DTT23 - Hard Brick / Concrete Blade

Blade Features:
• Stone and Hard Materials
• Fast Cuts
• Long life
• Marble, Natural Stone
• Extremely Hard Brick