Concrete Floor Treatment

Find concrete floor treatment products for your next project!

Husqvarna's floor treatments are ideal for re-grouting, concrete hole filling, patching and filling of small air pockets and pin holes. Their Hiperhard, Hiperguard and Hiperlith floor treatments harden floors while strengthening their resistance to abrasian, adding an attractive polish in the process.

Products are available in 1 gallon, 5 gallon or 55 gallon drums.

For more information, call us at 888-283-2597.

per page

List  Grid 

10 Item(s)

  1. Husqvarna GM3000 Floor Treatment

    Husqvarna GM3000 Floor Treatment

    GM 3000™ is specifically formulated for re-grouting and hole filling in concrete surfaces.  It's an inherent part of the HiPERFLOOR process.  GM 3000™ is effective for patching and filling small air pockets / pin holes when polishing concrete floors. 

    Price: $39.00
  2. AmeriPolish® EZ Etch Concrete Surface Etching Agent

    AmeriPolish® EZ Etch Concrete Surface Etching Agent

    AmeriPolish® EZ Etch is ideal for removing excessive mortar, free latent lime, grease, oil, food stains and organic material from concrete floors that may prevent penetration. EZ Etch works by opening up the pores / surface of the concrete to prepare it for penetrating products like AmeriPolish® ColorJuice Extreme, AquaShield, overlay concrete systems and also water or solvent based sealers. EZ Etch is enviromentally friendly and nonabrasive for use on polished concrete, stone, terrazzo and other custom concrete surfaces. EZ Etch is available in 1 Gallon, 5 Gallon, 30 Gallon* and 55 Gallon* sizes.

    * For 30 Gallon and 55 Gallon sizes please call for pricing and availability.

    Price: $45.00
  3. AmeriPolish® Oil Ingester Water-Based Microbial Stain Remover

    AmeriPolish® Oil Ingester Water-Based Microbial Stain Remover

    MADE IN THE USA AmeriPolish® Oil Ingester is a water-based microbial petroleum stain remover that consumes and breaks down oil-based stains and also absorbs odors from the surface of the concrete with out causing damage or affecting any existing colorant, sealer or stain protector. This biodegradeable and VOC compliant product is enviromentally safe and can be used daily. Deeply embeded oil spots may take weeks to be removed, remember this is normal as oil tends to penetrate deep in the concrete. Oil Ingester eats away at the oil an does not wash away into WWTP or city drainage run-offs. Oil Ingester is available in 1 Gallon and 5 Gallon sizes.

    Price: $82.00
  4. Ameripolish® PCA Penetrating Curing Agent

    Ameripolish® PCA Penetrating Curing Agent

    AmeriPolish® PCA is a penetrating curing agent that chemically hardens and dust-proofs concrete for improved abrasion resistance without forming a coating. PCA is recommended on newly placed concrete to add initial water and stain repellancy while retaining slab moisture for improved curing. AmeriPolish® PCA requires no UV light for dissipation and can be used with integrally colored concrete. PCA does not form a membrane like traditional cure and seal products, which means no more chemical strippers or aggressive metal bond abrasives are needed to remove PCA before polishing, saving you time and money. PCA is available in 5 Gallon, 30 Gallon, 55 Gallon* and 250 Gallon* sizes.

    * For 55 Gallon and 250 Gallon sizes please call for pricing and availability.

    Price: $199.00
  5. AmeriPolish® EZ-Kut Grinding Agent

    AmeriPolish® EZ-Kut Grinding Agent

    AmeriPolish® EZ-Kut Grinding Agent is a water based, rapid surface preparation pretreatment agent used for the initial cut on hard, dense concrete. EZ-Kut helps with exposing large aggregate faster than dry only or standard wet methods typically used. AmeriPolish® EZ-Kut will save you time and money by dramatically increasing the productivity of lower-grit diamond tooling, while extending the life of your tooling. EZ-Kut Grinding Agent achieves this by suspending concrete solids away from the surface for diamond tools to achieve maximum efficiency which then shortens the project time-line, reduces labor costs and extends the life of diamond tooling. EZ-Kut can be used as part of a full flood wet process, or as a mist as part of dry grinding. Available in 1 Gallon, 5 Gallon, 30 Gallon, 55 Gallon* and 250 Gallon* sizes.

    * For 55 Gallon and 250 Gallon sizes please call for pricing and availability.

    Price: $39.00
  6. Husqvarna HiperSeal Floor Treatment

    Husqvarna HiperSeal Floor Treatment

    HiperSeal™ is a topical sealer that can be applied to a concrete surface at the end of the polishing process.  By improving the surface sheen and stain resistance of the concrete, makes the concrete significantly more resistant to fats, oils, water, foods and mild acids.  Works by sealing the concrete surface and not allowing penetration of foreign material into the concrete. 

    Price: $72.00
  7. Husqvarna HiperLith Floor Treatment

    Husqvarna HiperLith Floor Treatment

    HiperLith Densifier is an additional treatment product in the Hiperfloor process. It is a lithium silicate applied to the concrete surface, to react with the calcium hydroxide that already exists in the concrete.

    Price: $35.00
  8. Husqvarna HiperGuard Floor Treatment

    Husqvarna HiperGuard Floor Treatment

    Hiperguard™ is a premium-grade surface impregnator, which is used in the final step of the HiPERFLOOR process.  By penetrating the concrete to form a film along the surface of the capillaries.  Stains are kept at the surface level, simplifies maintenance and cleaning, extending the lifespan of the floor.  Hiperguard™ also helps enhance the color of the material being sealed. 

    Price: $160.00
  9. Husqvarna HiperHard Floor Treatment

    Husqvarna HiperHard Floor Treatment

    Hiperhard™ is an additional product used as a densifier to react with the calcium hydroxide that already exists in the concrete.  Using this throughout the polish process hardens the floor and improves the abrasion resistance as well as having a significant impact on the floors appearance. 

    Price: $41.00
  10. AmeriPolish® Strip & Clean Stripping Agent

    AmeriPolish® Strip & Clean Stripping Agent

    AmeriPolish® Strip & Clean is a water-based stripping agent specifically formulated for the grind-free removal of the AmeriPolish® 3D SP sealer from polished concrete floors. Strip & Clean is also a great tool to prepare exterior concrete for ColorJuice applications. It helps remove mold, mildew and other contaminates that would otherwise impair the project. Strip & Clean is available in 1 Gallon, 5 Gallon*, 30 Gallon* and 55 Gallon* sizes.

    * For 5 Gallon, 30 Gallon and 55 Gallon sizes please call for pricing and availability.

    *** PLEASE REFER TO MSDS : Strip & Clean is a Hazardous Material and can ONLY be shipped Ground with an additional handling fee charged per gallon.***

    Price: $39.00
per page

List  Grid 

10 Item(s)