SKU: 75600

Edco CPU12 Electric Self Propelled Scarifier

EDCO CPU-12 Self Propelled Walk behind Scarifier 15 HP 230/460 Volt, Three phase electric engine with up to 12" working width and 1/8" working depth per pass (3 mm) will scarify approximately 1,250-1,500 sq. ft. per hour.  Scarifiers (aka Planers and Milling Machines) level, clean, and texture surfaces. They repair common slab problems like curled joints, unevenness, sidewalk trip hazards, and weather damage. Scarifiers remove contaminates, epoxy, paint, traffic lines, and more.

Be the first to review this product

Price: $20,399.00

100% SatisfactionGuarantee

Product Information

Edco CPU12 Electric Self Propelled Scarifier

This machine comes with an empty drum.  Cutters and spacers are sold separately.  See accessories for full start-up drum 

Product notes: Upcut drum rotation, optional outrigger axle assembly enables the machine to follow slab contours closely when working on uneven surfaces or when uniform surface removal is critical.  Hydrostatic drive transmission provides a smooth forward & reverse speed control.

SPECIFICATIONS:

Vacuum: N/A
Saw Model: No
iQ Package: No
Soff Cut Saw: No
Hepa Certified Filter: No
Joint Profile: No
Tank Sensor: No
Storage Life: No
Tension Load: No
Cure Time: No
Length: No
Tile Size: No
Attachment: No
Ring Blade: No
Cut n Break Blades: No
Grade Quality: No
Blade Series: No
Diameter: No
Segment Width: No
Material to Cut: No
Aggregate Hardness: No
HP of Saw: No
Extension Wings: No
Oil Guard: No
Water Tank KIt: No
Neoprene Kit: No
Grit: No
Track Feet: No
Segment: No
Shape: No
Size: No
Voltage: No
K 6500 & PP 65: No
Bond Type: No
Power Supply: No
Blade Guard: No
3-Speed: No
Soft Start: No
E-Trac: No
Clutch: No
Hydraulic Motor: No
Whip Hose: No
Bar and Chain: No
Arbor Size: No
Skid Plate: No
Catalytic Converter: No
Vac Pump: No
Shank: No
Opening Width: No
GPM: No
Power: 15 HP
Maximum HP: No
Engine: No
Air Flow, CFM: No
Air Watts: No
Lift: No
Inlet Size: No
Amp: 35 / 17.5
Torque: No
Capacity - Concrete Drilling: No
Capacity w/ Core Bit: No
Impact Energy - Joules: No
Impact Energy - ft. lbs.: No
Blows per Minute: No
No Load Speed: No
Overall Length: No
Cord Length: No
Bit Type: No
Tying Speed: No
Ties Per Coil: No
Number of Wraps Per Tie: No
Re-bar Size: No
Drill Steel Shank: No
Drill Steel Length: No
Drill Bit Diameter: No
Max Drill Depth: No
Drill Distance From Top of Slab: No
Minimum Cutout Width: No
SCFM Required: No
PSIG Required: No
Operating Weight: No
Plate Size WxL: No
Amplitude: No
Centrifugal Force: No
Exciter Speed: No
Compaction Depth: No
Travel Speed: No
Compaction Area: No
Horsepower Range: No
Equipment Type: No
Quality: No
Material: No
Blade Purpose: No
Diamond Depth : No
Segment Height: No
Segment Base: No
Bond Type: No
Grit Options: No
Power Source: Electric
Voltage: 230 / 460
Phase: Three
Max Capacity, GPM: No
Discharge Connection: No
Cutting Method: No
Max Head: No
Solid Diameter: No
Casing Material: No
Wear Plate Material: No
Rated Output, Watts: No
Cycle: No
Grinding Pressure: No
Grinding Width: No
Grinding Disc: No
Grinding Disc Speed: No
Starter: No
Arbor: No
Max Depth of Cut: No
Bladeshaft Diameter: No
Bladeshaft RPM: 2,100
Blade Flange: No
Blade Mounting: No
Blade Raise / Lower: No
Blade Shaft Bearings: No
Engine Cooling: No
Air Filter: No
Drive Speed: No
Transmission: Hydrostatic drive
Number of Belts: No
Handlebar Adjustment: No
Flow, GPM: No
Pressure, PSI: No
Wheel, Front: No
Wheel, Rear: No
Warranty: No
Recommended Generator: No
Weight: 980.0000
Hose Set: No
Hydraulic connections: No
Hydraulic oil capacity: No
Fuel capacity: No
Dimensions: 53" x 36" x 43"

FEATURES:

  • 12″ working width will scarify approximately 1,250-1,500 sq. ft. per hour at Depth Per Pass of 1/8″
  • Adjustable to 1/4″ working depth per pass
  • Accommodates EDCO’s largest cutters for longer life and more removal
  • Up-cut drum rotation and heavyweight construction provide faster milling action and more uniform surface texture
  • Standard Outrigger Axle Assembly enables the machinet o follow slab contours closely when working on uneven surfaces and provide uniform surface removal
  • Hydrostatic transmission with forward and reverse drive provides smooth speed changes and less operator fatigue
  • Cam-operated fifth wheel allows the operator to change direction or reposition the machine while the engine is still running
  • Hydraulic-powered engage/disengage lever lowers or raises drum from surface
Don't see what your looking for? Call us at (888) 283-2597 or email us steve@acecutting.com and we will help with any questions you may have.

Product Videos

Shipping

Ace Cutting is able to provide free shipping on their large equipment.  Freight delivery products require a commercial address - residential delivery addresses will result in a $150 fee.  If residential address is only option, please proceed with order and Ace Cutting will contact customer with a freight terminal pickup location or charge additional fee for residential address.

Customer Reviews

Write Your Own Review

You're reviewing: Edco CPU12 Electric Self Propelled Scarifier

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value

Related Products