Gorilla Crack Chase Saw
Gorilla's dustless crack chasing saws have been the OSHA solution for joint cutting / crack chasing in and outdoors. Choose between their 3-models the GCT 9" Silverback - GCT 4.5" and GCT 10"
Proudly made in the USA, The Gorilla GCT 4.5" dustless concrete crack chaser is a light weight alternative to crawling on your hands and knees which features excellent blade visibility and maneuverability for chasing cracks. It is safe and easy to operate while standing up so no more crawling around on your hands and knees! The GCT 4.5" crack chaser is made completely from 1/4" thick welded steel, no plastic to break! The one piece handle design gives you a solid feel while operating, and the 2" dust port is excellent for attaching to a vacuum and with the proper CFMs the saw is virtually dust free. The GCT 4.5" is powered by a 8.5A / 120V METABO W9-115 hand grinder which accepts a 4.5" blade that is up to 3/8" wide and can cut up to 3/4" deep.
The Gorilla GCT 10" joint clean-out saw is great for cleaning out joints or for cutting new ones. This joint saw features adjustable cutting depth with a 3" max cutting depth. It's proudly made in the USA from 1/4" thick-welded steel - (no plastic). The one piece handle design gives you a solid feel while operating, and the 2" baffled dust port is excellent for attaching to a vacuum for ideal dust control. The GCT-10 joint saw also features a quick blade depth adjust knob and 4" x 2" wheels with sealed bearings, requires a 8" - 10" blade.
The Gorilla GCT 9" Silverback joint clean-out saw was designed with every key feature needed in the concrete cutting and restoration business. The control handle that can rotate 90° to a blade that tilts 15° for making beveled cuts, or for cleaning out joints that are completely against the wall. The precision casters can be locked for straight cuts. Unlock them and make radius cuts. It's the ideal saw for chasing cracks. The blade depth can be adjusted in seconds without any tools. The dual joint and crack chasing saw has excellent blade visibility, 4" x 2" wheels with sealed precision bearings, as well as heavy-duty swivel casters with spring-loaded locks. The Gorilla crack chaser also features a quick blade depth adjustment knob and is made from 1/4" thick-welded steel - (no plastic). The one piece handle design gives you a solid feel while operating, and the 2" dust port is excellent for attaching to a vacuum for ideal dust control.
Gorilla Tools has taken its patent pending dust control technology and coupled it with a reliable Honda GX390 engine. This combination makes for a saw that has all the power you need and the dust control required by O.S.H.A. with a proper CFM's of vacuum, plus the heavy-duty frame is made of 1/4" thick steel with no precast components. The 1" blade arbor, held in by heavy-duty 4 bolt flange bearings, has the ability to stack blades up to 3/4" wide. Equiped with a blade sight door for accurate stops and starts during cutting, a quick lock for the depth control wheel, a 4-point hold down system for transportation, and two large lifting points on the front and back of the saw. Saw accepts blades from 8" - 14" and can cut up to 4" deep and 3/4" wide.