Our Cut-n-Break method is the natural choice when you need to cut deep without overcutting at the corners. The K 760 Cut-n-Break enables you to cut as deep as 16" from one side. The two high-speed blades make a core in the saw cut, which can then easily be broken off using the accompanying breaking tool. This way you easily work your way through the material, at a very low diamond tool and maintenance cost. Delivered with twin blades and a breaking tool.

Diamond Blades!

There are 3 different types of blades you can use with the Cut n Break saw, all of the same premium high quality.  Only difference is the bond used when making the saw blades, depending on the material to be cut.  For very hard reinforced concrete, the recommended blade is EL 10.  The EL 35 is for medium to hard concrete, general purpose (this is the blade that comes standard with each new saw) also the EL 70 meant for soft brick and block.  Click here to see these blades in our store.  


  • Cost-efficient cutting method

    Cost-efficient cutting method

    With the unique cut-n-break method you can work your way through the material step-by step at a low tool cost.

  • Exceptional cutting depth

    Exceptional cutting depth

    The long body and double cutting blades allow you to make cuts up to 16" deep.

  • High performing blades included

    High performing blades included

    Twin blades, with a very stable core and cutting performance are delivered with the machine.

  • Optimized engine performance

    Optimized engine performance

    Optimized engine performance through efficient cylinder design, digital ignition system and X-Torq® engine technology.

Have Questions about this Product? Call us at (888) 283-2597 or email us steve@acecutting.com and we will help with any questions you may have.