SKU: PB-550

Pulse Bac 500 Series Vacuum

Pulse-Bac 500 Series vacuums come standard with Pulse-Bac® Technology, our exclusive Cyclonic Debris Management System, and a one year limited warranty.  A tank Inspection Window and an optional Automatic Tool Start are also available.  The 550H model is HEPA Certified, meets and exceeds EPA and OSHA regulations when working with hazardous materials like Lead, Asbestos and Silica. 

Be the first to review this product

Price: $1,295.00

* Required Fields

Price: $1,295.00

Product Information

Pulse Bac 500 Series Vacuum

Includes: Unit with 8 gallon tank, (2) non-marking caster wheels, (1) handle, (1) 15’ x 1.5” locking hose, (1) 25’ x 12 gauge cord, (1) 8 piece accessory kit and replacement filters. *Note PB-500 Vacs cannot have both ATO and 220 volt.


Vacuum: N/A
Saw Model: N/A
iQ Package: N/A
Soff Cut Saw: N/A
Joint Profile: No
Tank Sensor: No
Storage Life: No
Tension Load: No
Cure Time: No
Length: No
Tile Size: No
Attachment: No
Ring Blade: No
Cut n Break Blades: No
Grade Quality: No
Blade Series: No
Diameter: No
Segment Width: No
Material to Cut: No
Aggregate Hardness: No
HP of Saw: No
Extension Wings: No
Oil Guard: No
Water Tank KIt: No
Neoprene Kit: No
Grit: No
Track Feet: No
Segment: No
Shape: No
Size: No
K 6500 & PP 65: No
Bond Type: No
Power Supply: No
Blade Guard: No
3-Speed: No
Soft Start: No
E-Trac: No
Clutch: No
Hydraulic Motor: No
Whip Hose: No
Bar and Chain: No
Arbor Size: No
Skid Plate: No
Catalytic Converter: No
Vac Pump: No
Shank: No
Opening Width: No
Power: No
Maximum HP: No
Engine: No
Air Flow, CFM: 124 (Sustained)
Air Watts: 450
Lift: 87"
Inlet Size: 1.5"
Amp: 12.7 Peak Amps
Torque: No
Capacity - Concrete Drilling: No
Capacity w/ Core Bit: No
Impact Energy - Joules: No
Impact Energy - ft. lbs.: No
Blows per Minute: No
No Load Speed: No
Overall Length: No
Cord Length: 25' comes w/ vacuum
Bit Type: No
Tying Speed: No
Ties Per Coil: No
Number of Wraps Per Tie: No
Re-bar Size: No
Drill Steel Shank: No
Drill Steel Length: No
Drill Bit Diameter: No
Max Drill Depth: No
Drill Distance From Top of Slab: No
Minimum Cutout Width: No
SCFM Required: No
PSIG Required: No
Operating Weight: No
Plate Size WxL: No
Amplitude: No
Centrifugal Force: No
Exciter Speed: No
Compaction Depth: No
Travel Speed: No
Compaction Area: No
Horsepower Range: No
Equipment Type: Pulse Vacuum
Quality: No
Material: No
Blade Purpose: No
Diamond Depth : No
Segment Height: No
Segment Base: No
Bond Type: No
Grit Options: No
Power Source: Electric
Voltage: 120 or 220 volt
Phase: No
Max Capacity, GPM: No
Discharge Connection: No
Cutting Method: No
Max Head: No
Solid Diameter: No
Casing Material: No
Wear Plate Material: No
Rated Output, Watts: No
Cycle: No
Grinding Pressure: No
Grinding Width: No
Grinding Disc: No
Grinding Disc Speed: No
Starter: Auto-start optional
Arbor: No
Max Depth of Cut: No
Bladeshaft Diameter: No
Bladeshaft RPM: No
Blade Flange: No
Blade Mounting: No
Blade Raise / Lower: No
Blade Shaft Bearings: No
Engine Cooling: No
Air Filter: No
Drive Speed: No
Transmission: No
Number of Belts: No
Handlebar Adjustment: No
Flow, GPM: No
Pressure, PSI: No
Wheel, Front: No
Wheel, Rear: No
Warranty: No
Recommended Generator: No
Weight: 30.0000
Hose Set: No
Hydraulic connections: No
Hydraulic oil capacity: No
Fuel capacity: No
Dimensions: No


  • Pulse-Bac® Automatic Self-Cleaning Vacuum Control Technology:  The PB-550 dust vacuum is equipped with patented Pulse-Bac Technology, the most advanced filter filtration system available, capable of preventing the filters from becoming faced with dust and debris and clogging during operation.  No blowers, shakers, compressors or buttons to push. 
  • Cyclonic Debris Management:  The PB-550 is equipped with an exclusive Cyclonic Debris Management system that reduces filter exposure to dust and debris. The CDM is located inside the tank at the air inlet and creates a cyclonic effect inside the tank, lowering dust and debris to the bottom of the tank and holding it there.
  • HEPA Filtration: The PB-550 is equipped with advanced patented (US Patent #8226739) twist on filters. The easy to install twist on design makes installing and replacing filters quick and easy. The advanced filter media pro-longs the life of the filters, thereby reducing filter replacement cost and dust migration. (It is recommended filters be changed after every 4 to 6 months of use)
  • Electronically Controlled:  The PB-550 Pulse-Bac® Technology is automatically controlled by a an advanced electronic PC board that uses surface mount technology with a conformal coating to protect it against moisture, dust and the elements.
  • Peripheral By-Pass Motor:  The PB-550 is outfitted with a peripheral by-pass motor, capable of generating over 140 CFM with 87.2 inches of sealed H2O lift.
  • Suit Case Tank with inspection window:  PB-550 comes with a 8 gal. 16 gauge powder coated steel tank that can be tilted back and moved across the surface and when not being moved sits securely in place. Two Tank inspection windows allows the user to see when the debris inside needs discarding.
  • One Year Limited Warranty: The PB-550 comes with a limited one year warranty
Don't see what your looking for? Call us at (888) 283-2597 or email us and we will help with any questions you may have.

Product Videos


Ace Cutting is able to provide free shipping on their large equipment.  Freight delivery products require a commercial address - residential delivery addresses will result in a $150 fee.  If residential address is only option, please proceed with order and Ace Cutting will contact customer with a freight terminal pickup location or charge additional fee for residential address.

Customer Reviews

Write Your Own Review

You're reviewing: Pulse Bac 500 Series Vacuum

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars