EDCO

View as List Grid

Items 1-10 of 20

Page
per page
Set Descending Direction
  1. Edco CPM8 Gas Walk Behind Scarifier with A201 Startup pack
    Edco CPM8 Gas Walk Behind Scarifier with A201 Startup pack
    $5,387.00

    EDCO CPM-8 Walk behind Scarifier 9HP Honda engine with 8" working width and 1/8" working depth per pass.  Able to scarify approximately 350-500 sq. ft. per hour.  Scarifiers (aka Planers and Milling Machines) level, clean, and texture surfaces. They repair common slab problems like curled joints, unevenness, sidewalk trip hazards, and weather damage. Scarifiers remove contaminates, epoxy, paint, traffic lines, and more!

    Learn More
  2. ProCart 14" Edco Masonry Saw Cart
    ProCart 14" Edco Masonry Saw Cart
    $483.00

    Edco's ProCart is the portable option to fit your BB-14" Edco Masonry Saw.  Side-mounted handles for balanced lifting load, this expandable ProCart is most convenient for adjusting working height. 

    Learn More
  3. A201 Carbide Startup Pack CPM-8
    A201 Carbide Startup Pack CPM-8
    $599.00

    The EDCO A201 6-Shaft CARBIDE Start Up Pack CPM-8 is designed for concrete and coating removal. EDCO Startup pack with 78 Carbide Cutter, 215 Spacers, 6 Shafts. Cutters and Spacers ONLY - drum sold separately.

    Learn More
  4. A206 Steel Startup Pack CPU-10FC
    A206 Steel Startup Pack CPU-10FC
    $1,279.00

    The EDCO A206 4-Shaft Steel Start Up Pack for CPU-10FC is designed for concrete and coating removal. Comes with 64 Carbide Cutters, 130 Spacers, 4 Shafts. Cutters and Spacers only- drum sold separately.

    Learn More
  5. TG10 Magna-Trap® 10″ Turbo Grinder 11HP Honda Gasoline Engine
    TG10 Magna-Trap® 10″ Turbo Grinder 11HP Honda Gasoline Engine
    $4,969.00

    EDCO Magna-Trap® 10" Turbo Grinder with 11HP Honda engine. Grind wet or dry with the 10" of working width which will grind approximately 400-500 sq. ft. per hour at 1/16" with an EDCO Diamond Disc.  The RIGID head assembly is ideal for grinding uneven expansion joints, high sopts, joint curls and bridge decks, to remove coatings and grinding rough concrete surfaces. The FLEX head assembly is ideal for preparing a smooth, flat floor to recieve a new coating, removing coatings and grinding rough concrete surfaces while grinding surfaces 4x faster than a traditional floor grinder!

    Learn More
  6. Edco Universal Folding Stand
    Edco Universal Folding Stand
    $119.00

    Edco offers different stands or carts to be used depending on your cutting needs, Edco's folding stand is helps with basic cutting needs for either your masonry or hardscape Edco saw.  

    Learn More
  7. BB14G 14" Edco Masonry Table Saw
    BB14G 14" Edco Masonry Table Saw
    $2,883.00

    Edco BB14G-6.5H  14" table saw with a reliable 6.5HP Honda GX200 engine is perfect for professional masons, paver installers and manufacturers, landscape suppliers, masonry equipment suppliers and rental shops. Ideal for cutting interlocking pavers, brick, stepping and cultured stones. The saws can accommodate a 14" blade and with teh rolling table can cut a 16" block. Saw includes a belt driven water pump and an adjustable cutting head that can be used manually or locked in a fixed position.

    ** Saw ONLY - Procart Shown in Picture or Folding Stand are Available Separately. **

    Learn More
  8. A202 Steel Startup Pack CPM-8
    A202 Steel Startup Pack CPM-8
    $339.00

    The EDCO A202 6-Shaft Steel Start Up Pack CPM-8 is designed for pain line removal. EDCO Startup pack with 150 Steel Cutters, 175 Spacers, 6 Shafts. Cutters and Spacers ONLY - drum sold separately.

    Learn More
  9. A205 Carbide Startup Pack CPU-12
    A205 Carbide Startup Pack CPU-12
    $1,969.00

    The EDCO A205 6-Shaft Carbide Start Up Pack for CPU-12 is designed for concrete and coating removal. Comes with 100 Carbide Cutters, 300 Spacers, 6 Shafts. Cutters and Spacers only- drum sold separately.

    Learn More
  10. iQT20 Table For iQ2000 Series System
    iQT20 Table For iQ2000 Series System
    $2,290.00

    iQ Power Tools Dust Collection Table for iQ2000 series 20" concrete and masonry saws. Complete ready-to-install table fits MK, Target /Husqvarna, MultiQuip/Stow, Edco, Clipper, Core Cut 20” saws. Table must be ordered and set-up for each saw at the factory before shipping.

    Learn More
 
View as List Grid

Items 1-10 of 20

Page
per page
Set Descending Direction
© 2018 Ace Cutting Equipment & Supply, All rights reserved

Privacy Policy