Edco Scarifiers

Scarifiers, also known as Planers or Milling Machines, have the ability to level, clean and texture concrete surfaces. Repairing common slab issues or curled joints, unevenness, sidewalk trip hazards and weather damage. Edco Scarifiers remove contaminates, epoxy, paint, traffic lines and much more.

View as List Grid

Items 1-10 of 12

Page
per page
Set Descending Direction
  1. Edco CPM8 Gas Walk Behind Scarifier with A201 Startup pack
    Edco CPM8 Gas Walk Behind Scarifier with A201 Startup pack
    $5,399.00

    EDCO CPM-8 Walk behind Scarifier 9HP Honda engine with up to 8" working width (20 cm) and 1/8" working depth per pass (3 mm) will scarify approximately 350-500 sq. ft. per hour.  Scarifiers (aka Planers and Milling Machines) level, clean, and texture surfaces. They repair common slab problems like curled joints, unevenness, sidewalk trip hazards, and weather damage. Scarifiers remove contaminates, epoxy, paint, traffic lines, and more.

    Learn More
  2. Edco CPM8 Electric Walk Behind Scarifier
    Edco CPM8 Electric Walk Behind Scarifier
    $4,409.00

    EDCO CPM-8 Walk behind Scarifier 5 HP Electric Motor with 8" working width (20 cm) and 1/8" working depth per pass (3 mm) will scarify approximately 350-500 sq. ft.  Scarifiers (aka Planers and Milling Machines) level, clean, and texture surfaces. They repair common slab problems like curled joints, unevenness, sidewalk trip hazards, and weather damage. Scarifiers remove contaminates, epoxy, paint, traffic lines, and more.

    Learn More
  3. Edco CPM10 Gas Walk Behind Scarifier
    Edco CPM10 Gas Walk Behind Scarifier
    $5,489.00

    EDCO CPM-10 Walk behind Scarifier 13HP Honda engine with up to 10" working width and 1/8" working depth per pass (3 mm) will scarify approximately 500-700 sq. ft. per hour.  Scarifiers (aka Planers and Milling Machines) level, clean, and texture surfaces. They repair common slab problems like curled joints, unevenness, sidewalk trip hazards, and weather damage. Scarifiers remove contaminates, epoxy, paint, traffic lines, and more.

    Learn More
  4. Edco CPM10 Electric Walk Behind Scarifier
    Edco CPM10 Electric Walk Behind Scarifier
    $3,999.00

    EDCO CPM-10 Walk behind Scarifier 7.5 HP Electric 230/460 Volt - Three Phase Motor with up to 10" working width and 1/8" working depth per pass (3 mm) will scarify approximately 500-700 sq. ft. per hour.  Scarifiers (aka Planers and Milling Machines) level, clean, and texture surfaces. They repair common slab problems like curled joints, unevenness, sidewalk trip hazards, and weather damage. Scarifiers remove contaminates, epoxy, paint, traffic lines, and more.

    Learn More
  5. Edco CPU10FC Gas Self Propelled Scarifier
    Edco CPU10FC Gas Self Propelled Scarifier
    $10,244.00

    EDCO CPM-10 Self Propelled Walk behind Scarifier 13 HP Honda engine with up to 10" working width and 1/8" working depth per pass (3 mm) will scarify approximately 500-750 sq. ft. per hour.  Scarifiers (aka Planers and Milling Machines) level, clean, and texture surfaces. They repair common slab problems like curled joints, unevenness, sidewalk trip hazards, and weather damage. Scarifiers remove contaminates, epoxy, paint, traffic lines, and more.

    Learn More
  6. Edco CPU12 Electric Self Propelled Scarifier
    Edco CPU12 Electric Self Propelled Scarifier
    $24,799.00

    EDCO CPU-12 Self Propelled Walk behind Scarifier 15 HP 230/460 Volt, Three phase electric engine with up to 12" working width and 1/8" working depth per pass (3 mm) will scarify approximately 1,250-1,500 sq. ft. per hour.  Scarifiers (aka Planers and Milling Machines) level, clean, and texture surfaces. They repair common slab problems like curled joints, unevenness, sidewalk trip hazards, and weather damage. Scarifiers remove contaminates, epoxy, paint, traffic lines, and more.

    Learn More
  7. A201 Carbide Startup Pack CPM-8
    A201 Carbide Startup Pack CPM-8
    $599.00

    The EDCO A201 6-Shaft CARBIDE Start Up Pack CPM-8 is designed for concrete and coating removal. EDCO Startup pack with 78 Carbide Cutter, 215 Spacers, 6 Shafts. Cutters and Spacers ONLY - drum sold separately.

    Learn More
  8. A202 Steel Startup Pack CPM-8
    A202 Steel Startup Pack CPM-8
    $339.00

    The EDCO A202 6-Shaft Steel Start Up Pack CPM-8 is designed for pain line removal. EDCO Startup pack with 150 Steel Cutters, 175 Spacers, 6 Shafts. Cutters and Spacers ONLY - drum sold separately.

    Learn More
  9. A210 Carbide Startup Pack CPU-10FC
    A210 Carbide Startup Pack CPU-10FC
    $1,570.00

    The EDCO A210 6-Shaft Carbide Start Up Pack for CPU-10FC is designed for concrete and coating removal. Comes with 96 Carbide Cutters, 240 Spacers, 6 Shafts. Cutters and Spacers only- drum sold separately.

    Learn More
  10. A206 Steel Startup Pack CPU-10FC
    A206 Steel Startup Pack CPU-10FC
    $1,279.00

    The EDCO A206 4-Shaft Steel Start Up Pack for CPU-10FC is designed for concrete and coating removal. Comes with 64 Carbide Cutters, 130 Spacers, 4 Shafts. Cutters and Spacers only- drum sold separately.

    Learn More
 
View as List Grid

Items 1-10 of 12

Page
per page
Set Descending Direction

Recently viewed Products

NEED HELP ?

Can’t find a tool? Reach out and we will do our best to source it for you.

CALL US 1.888.283.2597

  • Monday - Friday 7:00 AM to 5:00 PM EST
  • 25806 Novi Rd. Novi, MI 48375

RESOURCE CENTER

Find what you need by clicking below. 

 
© 2017 Ace Cutting Equipment & Supply, All rights reserved Privacy Policy | Website Design & Development by Unleaded Group